Changes between Version 93 and Version 94 of NanoBSD

Timestamp:

Dec 27, 2009, 3:21:27 PM (16 years ago)

Author:

huub

Comment:

--

NanoBSD

@@ -188 +188 @@
  Place the new CF disk in the machine and boot it up (existing nodes: just reboot), you should be good to go! Especially first time booting can take a long time, depending also on hardware. In a Soekris4521 this takes about ten minutes. You can follow the boot process using e.g. minicom or tip, via a serial connection (communication parameters: 9600 8N1).
 
- Note. For subsequent nodes you can skip the build and go directly for step C, or take a look at development if you have to rebuild the image (after small changes).
+  Note 1. For subsequent nodes you can skip the build and go directly for step C, or take a look at development if you have to rebuild the image (after small changes).
+
+  Note 2. Check your bios version in case of booting problems (note: default communication setting for alix is 38400 8N1, bios should be 0.99h) 
  
 == F. Applying Updates ==