Changes between Version 49 and Version 50 of FreeBSD10_Guide

Timestamp:

Aug 28, 2014, 7:18:58 PM (10 years ago)

Author:

huub

Comment:

--

FreeBSD10_Guide

@@ -184 +184 @@
  Note 1: Take a coffee of go for a hike, this normally takes 2 - 8 hours depending on the machine configuration. If you like to save some power use the script provided by Rick ([http://rickvanderzwet.nl/svn/personal/misc/power-saver]). This script is mainly used on a home server for building FreeBSD world and kernels. As soon it is done it can shutdown if not being used anymore. The system has Wake-On-Lan support and can thus be activated again from remote.
 
- Note 2: even this little script got flags, check the output of {{{sh /usr/src/tools/tools/nanobsd/nanobsd.sh -h}}}
+ Even this little script got flags, check the output of {{{sh /usr/src/tools/tools/nanobsd/nanobsd.sh -h}}}
  {{{
 -b suppress builds (both kernel and world)
@@ -193 +193 @@
  }}}
 
- Note 3: a '''safe alternative''' is the image-script available in $R/tools/ :
+ Tip: a '''safe alternative''' is the image-script available in $R/tools/ :
 {{{
  build# $R/tools/image build
@@ -200 +200 @@
 
 
- Note 4: The geometry of the cf card is defined in the nanobsd configuration file $R/cfg/nanobsd.wleiden
- The 'default' values are for a Peak 1 GB card. They also work on an Alix2D3 board with a 1 GB PCEngines 'blanc' cf card and 1 or 2 GB Transcend cf cards although those geometries are different. There are issues with Soekris boards, depending on BIOS version.
-
+ Note 2: The geometry of the cf card is defined in the nanobsd configuration file $R/cfg/nanobsd.wleiden
+ The 'default' values are for a Peak 1 GB card. They also work on an Alix2D3 board with a 1 GB PCEngines 'blanc' cf card and 1 or 2 GB Transcend cf cards although those geometries are different. There are issues with Soekris boards, depending on the BIOS version.
+