As a rule of thumb here are the settings you need to do:

1. Static IP
2. No NAT
3. No Firewall
4. Enable SNMP

Login via ssh and add the following lines to /tmp/system.cfg =============== snmp.community=public snmp.contact=beheer@… snmp.location=WL snmp.status=enabled ===============

Execute: cfgmtd -w

Reboot the Bridge to enable the change.

1. Enable SSH
2. Change username/password
3. Assign Device name

Ubiquity Gear

XXX: Describe Ubiquity stuff (with pictures) and some settings specifics.

Bullet2

Bullet5

NanoStation2

NanoStation5

NanoStationM5