#
#
#  Read by /usr/local/sbin/wireless-up.pl
#
# config CNodeUniGorN
#
# let op, namen van ap en interlink moeten veranderen, maar nu nog niet gedaan ivm breken van andere nodes.
#
# Hugo
$location="Bovenste omloop van het Gorlaeus Lab, Universiteit Leiden, voor Kaag/Rijnsburg/Oegstgeest";

$master_ip='172.19.135.1';  
$AGGREGATE='24';
$gw_open='closed';
$nodetype='cnode';
$nodename='UniGorN';
$labelpos='left';
$DISK='FLASH';

$OS='FreeBSD';

$status='up';

$X='91529';
$Y='464821';
$N='';
$E='';

$config{'sis0'}=sprintf <<SIS0;  # EthernetLink naar UniGor
TYPE=ethernet
IP=172.16.1.170/30
DESC=EthernetLink naar UniGor
SDESC=eth0
SPEED=10240000000
POINT_TO_POINT=172.16.1.169

DHCP=no

OSPF_BROADCAST=no
OSPF_NEIGHBORS=172.16.1.169
SIS0

$config{'sis0:0'}=sprintf <<SIS01; #link naar gorlaeus 
TYPE=wireless
IP=172.19.128.69/28
DESC=Local gorlaeus subnet
SDESC=2gorlaeus
SPEED=1024000000

OSPF_BROADCAST=no
OSPF_NEIGHBORS=no

DHCP=no

SIS01

$config{'wi0'}=sprintf <<EW0; #link naar kaag2
TYPE=wireless
IP=172.16.1.45/30
DESC=Link naar kaag2
SDESC=2kaag2
SPEED=11534336
POINT_TO_POINT=172.16.1.46
OSPF_BROADCAST=no
OSPF_NEIGHBORS=172.16.1.46
DHCP=no
MODE=master
ESSID=ap-n.unigorn.wleiden.net
CHANNEL=9
POLAR=Ver
ANTENNA=SD19
GAIN=19dBi
DIRECTION=45
BEAMWIDTH=30
CABLE=0
HEIGTH=50
EW0

$config{'wi0:0'}=sprintf <<EW00; #link naar kaag
TYPE=wireless
IP=172.16.0.217/30
DESC=Link naar kaag
SDESC=2kaag
SPEED=11534336
POINT_TO_POINT=172.16.0.218
OSPF_BROADCAST=no
OSPF_NEIGHBORS=172.16.0.218
DHCP=no
EW00


$config{'wi1'}=sprintf <<EW1;  # oegstgeest richting N
TYPE=wireless
IP=$master_ip/26
DESC=AP Richting O
SDESC=n
SPEED=11534336
DHCP=10-60
#DHCP_STATIC= host ipaq1{hardware ethernet 00:02:2D:0E:4F:0D; fixed-address 172.18.8.2;} host ipaq2{hardware ethernet 00:02:2D:09:21:28; fixed-address 172.18.8.3;}
OSPF_AREA=191
OSPF_BROADCAST=no
OSPF_NEIGHBORS=no
MODE=master
ESSID=il-no.unigorn.wleiden.net
CHANNEL=3
POLAR=Ver
ANTENNA=pa4040
GAIN=14dBi
DIRECTION=315
BEAMWIDTH=30
CABLE=0
HEIGTH=50
EW1


$config{'wi1:0'}=sprintf <<EW10;  
TYPE=wireless
IP=172.16.1.89/30
DESC=Link naar Rustenborgh
SDESC=2rustenborch
SPEED=11534336
POINT_TO_POINT=172.16.1.90

OSPF_BROADCAST=no
OSPF_NEIGHBORS=172.16.1.90
DHCP=no
EW10

$config{'wi1:1'}=sprintf <<EW11;
TYPE=wireless
IP=172.16.1.93/30
DESC=Link naar Hofwijck
SDESC=2hofwijck
SPEED=11534336
POINT_TO_POINT=172.16.1.94

OSPF_BROADCAST=no
OSPF_NEIGHBORS=172.16.1.94

DHCP=no
EW11