source: genesis/nodes/CNodeVosko2/wleiden.conf@ 8399

Last change on this file since 8399 was 8261, checked in by rick, 14 years ago
  • Commented variables are kind of useless as no program will be able to parse them. So made them 'active'
  • The text behind the $config proves to be a more usefull description than the normal DESC field, pushed them into a variable called COMMENT so we can finally start using them.
  • Commented code is in general bad stuff with a revision control system as it clutters the view, made the non active interface just 'idle' active.
File size: 1.3 KB
RevLine 
[8064]1#
2# config CNodeVosko2
3
4$location="Pieterskerk, Kloksteeg 16, 2311 SL, Leiden";
5$master_ip='172.17.175.1';
6$nodetype='CNode';
7$nodename='Vosko2';
8$release="8.0-RELEASE";
9$status='up';
10$X='93459';
11$Y='463657';
12
[8261]13$config{'ath0'}=sprintf <<ATH0;
14COMMENT=ap noord
[8064]15TYPE=wireless
16IP=$master_ip/26
17DESC=AP west
18SDESC=ap-n
19DHCP=10-60
20MODE=master
21ESSID=ap-WirelessLeiden-Vosko2
22CHANNEL=2
23ATH0
24
[8261]25$config{'vr0'}=sprintf <<VR0;
26COMMENT=naar Rund
[8064]27TYPE=ethernet
28EXTRA_TYPE=eth2wifibridge
29IP=172.16.0.178/30
30DESC=Link naar rund
31SDESC=2rund
32DHCP=no
[8261]33MODE=master
34ESSID=il-no.vosko2.wleiden.net
35CHANNEL=44
36NSMAC=00:15:6D:F3:35:7D
[8064]37VR0
38
39
[8261]40$config{'vr1'}=sprintf <<VR1;
41COMMENT=link Robijn
[8071]42TYPE=ethernet
43EXTRA_TYPE=eth2wifibridge
[8191]44IP=172.16.4.113/29
[8071]45DESC=interlink w (Robijn)
46SDESC=2Robijn
[8261]47MODE=master
48ESSID=il-w.vosko2.wleiden.net
49CHANNEL=140
50NS_IP=172.16.4.114/29
51NSMAC=00:15:6D:F7:BE:F7
[8071]52DHCP=no
53VR1
54
[8261]55$config{'vr1:0'}=sprintf <<VR10;
56COMMENT=link naar Huub
[8104]57TYPE=ethernet
58EXTRA_TYPE=eth2wifibridge
[8191]59IP=172.16.4.121/29
[8104]60DESC=interlink w (Huub)
61SDESC=2huub
62DHCP=no
63VR10
64
[8261]65$config{'vr1:1'}=sprintf <<VR11;
66COMMENT=link naar BCSte
[8191]67TYPE=ethernet
68EXTRA_TYPE=eth2wifibridge
[8235]69IP=172.16.3.155/29
[8191]70DESC=interlink w (BCSte)
71SDESC=2bcste
72DHCP=no
73VR11
74
[8261]75$config{'vr2'}=sprintf <<VR2;
76COMMENT=lokaal ethernet (naar Vosko1, 3)
[8064]77TYPE=ethernet
78IP=172.17.175.72/28
79DESC=lokaal ethernet
80SDESC=ethernet
81DHCP=no
[8071]82VR2
[8064]83
84
Note: See TracBrowser for help on using the repository browser.