source:
genesis/nodes/CNodeRWgemhuis2/wleiden.conf@
6822
Last change on this file since 6822 was 6530, checked in by , 16 years ago | |
---|---|
|
|
File size: 1.5 KB |
Rev | Line | |
---|---|---|
[4376] | 1 | # |
2 | # Read by /usr/local/sbin/wireless-up.pl | |
3 | # | |
4 | # config CNodeRWgemhuis2 | |
[6530] | 5 | $location="Gemeentehuis Jacobswoude Rijnsaterwoude, Herenweg 165, 2465 AH, Rijnsaterwoude"; |
6 | ||
[4376] | 7 | $master_ip='172.25.34.1'; |
8 | $gw_open='closed'; | |
9 | $nodetype='CNode'; | |
10 | $nodename='RWgemhuis2'; | |
[4996] | 11 | $release="5.0-RELEASE"; |
[4998] | 12 | $node_config_version="1"; |
13 | $genesis_control="YES"; | |
[4996] | 14 | |
[4376] | 15 | $OS='FreeBSD'; |
16 | $labelpos='right'; | |
17 | ||
[4519] | 18 | $status='up'; |
[4376] | 19 | |
[4868] | 20 | # edugis x,y 106050,467405 |
21 | $X='106050'; | |
22 | $Y='467405'; | |
[4376] | 23 | |
24 | $LOCATION='Gemeentehuis Jacobswoude Rijnsaterwoude'; | |
25 | ||
26 | $config{'sis0'}=sprintf <<ED0; # ethernet poort 0 Soekris | |
27 | TYPE=ethernet | |
28 | IP=172.25.34.65/29 | |
29 | ||
30 | DESC=Ethernet | |
31 | SDESC=eth | |
32 | SPEED=10240000000 | |
33 | DHCP=no | |
34 | ||
35 | ||
36 | ED0 | |
37 | ||
38 | $config{'sis1'}=sprintf <<ED1; # Link tussen eth 1 RWgemhuis1 en 2. | |
39 | TYPE=ethernet | |
40 | IP=172.16.1.242/30 | |
41 | ||
[4750] | 42 | DESC=Ethernet naar RWGemhuis1 |
43 | SDESC=2rwgemhuis1 | |
[4376] | 44 | SPEED=10240000000 |
45 | POINT_TO_POINT=172.16.1.241 | |
46 | DHCP=no | |
47 | ||
48 | ||
49 | ED1 | |
50 | ||
[4553] | 51 | $config{'wi0'}=sprintf <<EW0; # link naar Node Struyk Verwo |
[4376] | 52 | TYPE=wireless |
[4530] | 53 | IP=172.16.1.53/30 |
54 | DESC=Link naar Struyk Verwo | |
[4750] | 55 | SDESC=2lmstruykverwo1 |
[4376] | 56 | SPEED=11534336 |
[4530] | 57 | POINT_TO_POINT=172.16.1.54 |
[4376] | 58 | |
59 | MODE=master | |
[4530] | 60 | ESSID=il-nw.rwgemhuis.wleiden.net |
61 | CHANNEL=1 | |
[4376] | 62 | |
63 | POLAR=Horz | |
[4530] | 64 | ANTENNA=SD15 |
65 | GAIN=15dBi | |
[4376] | 66 | DIRECTION=260 |
67 | BEAMWIDTH=0 | |
68 | CABLE=1 | |
69 | ||
70 | DHCP=no | |
71 | ||
72 | EW0 | |
73 | ||
[4530] | 74 | $config{'wi1'}=sprintf <<EW1; # link naar Node WB rotary |
[4376] | 75 | TYPE=wireless |
[4553] | 76 | IP=172.16.2.26/30 |
[4530] | 77 | DESC=Link naar Woubrugge |
[4750] | 78 | SDESC=2WBrotary2 |
[4376] | 79 | SPEED=11534336 |
[4553] | 80 | POINT_TO_POINT=172.16.2.25 |
[4376] | 81 | |
[4553] | 82 | MODE=client |
83 | ESSID=il-no.wbrotary.wleiden.net | |
84 | #CHANNEL=9 | |
[4376] | 85 | |
86 | POLAR=Horz | |
[4553] | 87 | ANTENNA=SD15 |
88 | GAIN=15dBi | |
[4376] | 89 | DIRECTION=260 |
90 | BEAMWIDTH=0 | |
91 | CABLE=1 | |
92 | ||
93 | DHCP=no | |
94 | ||
[4870] | 95 | EW1 |
Note:
See TracBrowser
for help on using the repository browser.