Welcome to the Lantaarnpaal WiFi project

Aim and scope

The aim of the project is to develop a node built inside the famous, ​historic Leyden street lantern. A street lantern has interesting potential to function as a wifi spot: optimum locations, availability of electric power (at least at night), easily recognizable for users (such as tourists).

There are also challenges:

• no local internet connection;
• power is switched off during daylight hours (at least for the coming years);
• hardware should not interfere with historic character;
• possible radio interference.

Local internet connection

Potential solutions:

• wifi interlink to nearby Wireless Leiden node
• use of ethernet over power line, for instance using ​Corinex powerline adapters

The Corinex manual is available in svn ​Corinex_CXP-HDC_LVC_UserGuide .

Power supply

As long as power is switched off during daylight hours we will need a local battery. The battery should be as small as possible and allow a large number of discharge cycles.

Hardware configuration

The antennas should be placed inside the hood and above the mirror plate (see the ​drawings. One solution would be to use a raspberrypi-2 or -3 with usb-wifi-dongles. Raspberry Pi 2 is based on Broadcom BCM2836 SoC, which includes a quad-core Cortex-A7 CPU running at 900 MHz and 1 GB RAM. There are 4 usb ports. Ideally the poweradapter and battery pack should also be located inside the hood (no installation work in lantern base).

Radio interference

In the setup with wifi-interlinks (5 GHz) and two accesspoints (both 802.11g and 802.11a) there are four antennas in the hood, closely spaced (30 cm). Moreover the construction of the hood may interfere with the radio signals.

Art project

The basic idea is to put a led display behind the little square window in the hood to show some artistic image. For instance the GPIO could be used in combination with a ​RGB dot matrix display. Several ​display connections are available on the raspi.

---

Trac is a minimalistic approach to web-based management of software projects. Its goal is to simplify effective tracking and handling of software issues, enhancements and overall progress.

All aspects of Trac have been designed with the single goal to help developers write great software while staying out of the way and imposing as little as possible on a team's established process and culture.

As all Wiki pages, this page is editable, this means that you can modify the contents of this page simply by using your web-browser. Simply click on the "Edit this page" link at the bottom of the page. WikiFormatting will give you a detailed description of available Wiki formatting commands.

"trac-admin yourenvdir initenv" created a new Trac environment, containing a default set of wiki pages and some sample data. This newly created environment also contains documentation to help you get started with your project.

You can use trac-admin to configure ​Trac to better fit your project, especially in regard to components, versions and milestones.

TracGuide is a good place to start.

Enjoy!
The Trac Team

Starting Points

• TracGuide -- Built-in Documentation
• ​The Trac project -- Trac Open Source Project
• ​Trac FAQ -- Frequently Asked Questions
• TracSupport -- Trac Support

For a complete list of local wiki pages, see TitleIndex.