Context Navigation

Changes between Version 14 and Version 15 of WikiStart

-              v14
+              v15
 == Hardware configuration ==
 The antennas should be placed inside the hood and above the mirror plate (see the [http://www.wirelessleiden.nl/album/index.php/hardware/LeidseLantaarn drawings].
+The antennas should be placed inside the hood and above the mirror plate (see the [http://www.wirelessleiden.nl/album/index.php/hardware/LeidseLantaarn drawings]. Ideally the router board, poweradapter and battery pack should also be located inside the hood (no installation work in lantern base).
 One solution would be to use a raspberrypi-2 or -3 with usb-wifi-dongles. Raspberry Pi 2 is based on Broadcom BCM2836 SoC, which includes a
+quad-core Cortex-A7 CPU running at 900 MHz and 1 GB RAM. There are 4 usb ports. Ideally the poweradapter and battery pack should also be located inside the hood (no installation work in lantern base).
+quad-core Cortex-A7 CPU running at 900 MHz and 1 GB RAM. There are 4 usb ports. In a first setup we will test [http://www.edimax.com/edimax/merchandise/merchandise_detail/data/edimax/uk/wireless_adapters_ac600_dual-band/ew-7811usc/ Edimax EW-7811USC] AC600 dual-band usb-adapters that use the rtl8812au driver.
 Another (more expensive) possibility might be a board with multiple minipci connectors like the [http://routerboard.com/RB435G RB435G], avoiding the use of usb.