Changes between Version 11 and Version 12 of WikiStart

Timestamp:

Mar 18, 2016, 1:33:27 PM (9 years ago)

Author:

huub

Comment:

--

WikiStart

@@ -20 +20 @@
 
 == Hardware configuration ==
-The antennas should be placed inside the hood and above the mirror plate (see the [http://www.wirelessleiden.nl/album/index.php/hardware/LeidseLantaarn drawings]. One solution would be to use a raspberrypi-2 or -3 with usb-wifi-dongles. Raspberry Pi 2 is based on Broadcom BCM2836 SoC, which includes a
+The antennas should be placed inside the hood and above the mirror plate (see the [http://www.wirelessleiden.nl/album/index.php/hardware/LeidseLantaarn drawings]. 
+One solution would be to use a raspberrypi-2 or -3 with usb-wifi-dongles. Raspberry Pi 2 is based on Broadcom BCM2836 SoC, which includes a
 quad-core Cortex-A7 CPU running at 900 MHz and 1 GB RAM. There are 4 usb ports. Ideally the poweradapter and battery pack should also be located inside the hood (no installation work in lantern base).
+Another (more expensive) possibility might be a board with multiple minipci connectors like the [http://routerboard.com/RB435G RB435G], avoiding the use of usb.
 
 == Radio interference ==