Changes between Version 19 and Version 20 of WikiStart

Timestamp:

Jun 15, 2012, 11:15:07 AM (12 years ago)

Author:

richardvm

Comment:

--

WikiStart

@@ -58 +58 @@
 {{{
 Volgende stappen nog niet getest
- 5. 1. If you have a fresh new Air OS install you can upload the following image to
+ 6. 1. If you have a fresh new Air OS install you can upload the following image to
        your bullet. You will get a message that this is not a ubnt image, you 
        can ignore this message. Just in case be ready to use method 2 
        (recovery mode) with a ubnt image.
 
-       $R/openwrt/bin/ar71xx/openwrt-ar71xx-ubnt-bullet-m-squashfs-factory.bin 
+       bin/ar71xx/openwrt-ar71xx-ubnt-bullet-m-squashfs-factory.bin 
 
     2. You need a tftp client for this, tested on Ubuntu 10.10
@@ -69 +69 @@
        1. First of all, power off the device 
        2. Set your laptop in the 192.168.1.0/24 range, not being 192.168.1.20
-       3. Connect the Bullet your computer via a utp cable
-       4. Begin by pressing the reset button. Keep holding, then power the 
+       3. Connect the Bullet to your computer via a utp cable
+       4. Begin by pressing the reset button. Keep holding it, then power the 
           unit on. Wait 8 seconds then release the button. Signal LEDs will be 
           lit indicating that the device is ready for recovery.
 
        On your computer
-       5. cd $R/openwrt/bin/ar71xx/ resp. $R/openwrt/bin/atheros/
+       5. cd bin/ar71xx/ 
        6. tftp 192.168.1.20
        7. bin
@@ -83 +83 @@
       11. Wait for a couple of minutes, your bullet will be reachable on 192.168.1.1 as openwrt
 
- 6. Default password: Edur0@m
-
- 7. Creating unique vpn info:
+ 7. Default password: Edur0@m
+
+ 8. Creating unique vpn info:
 
        1. Make up a fancy name, in this manual it will be 'name' or <name>