#
# config CNodeBurcht

$location="Societeitsgebouw de Burcht";
$master_ip='172.17.184.1';
$gw_open='closed';
$nodetype='CNode';
$nodename='Burcht';

$release="5.0-RELEASE";
$node_config_version="1";
$genesis_control="YES";

$OS='FreeBSD';

$status='up';

# edugis x,y 93794,463755
$X='93794';
$Y='463755';

# Range which spans the two ethernet nic's to the
# two AP's (ep0, xl0)
#
$tproxy='172.17.184.64/26 172.17.184.128/26';

$config{'xl0'}=sprintf <<XL0;
TYPE=ethernet
IP=172.17.184.65/26

DESC=Access Point 1 (tuinzaal)
SDESC=aptuinzaal
SPEED=10240000000

# Keep one IP address (66) available for the
# Accesspoint itself. The topmost address
# (127) is broadcast.
DHCP=67-126

OSPF_BROADCAST=no
OSPF_NEIGHBORS=no

XL0

$config{'xl1'}=sprintf <<XL1;
TYPE=ethernet
IP=172.17.184.129/26

DESC=Access Point 2 (kroeg)
SDESC=apkroeg
SPEED=102400000000

OSPF_BROADCAST=no
OSPF_NEIGHBORS=no

# Keep one IP addres for the AP (130)
# topmost 191 is the broadcast address.
#
DHCP=131-190

XL1

#$config{'wi0'}=sprintf <<EW0;
#TYPE=wireless
#IP=172.16.0.146/30
#
#DESC=Interlink naar Vosko
#SDESC=2vosko
#SPEED=11534336
#
#DHCP=no
#
#POINT_TO_POINT=172.16.0.145
#
#OSPF_BROADCAST=no
#OSPF_NEIGHBORS=172.16.0.145
#
#MODE=managed
#ESSID=il-no.vosko.wleiden.net
#
#POLAR=HOR
#ANTENNA=8080
#GAIN=8dBi
#DIRECTION=45
#BEAMWIDTH=180
#CABLE=2
#HEIGTH=15
#
#EW0


$config{'wi1'}=sprintf <<EW1;
TYPE=wireless
IP=172.16.0.106/30

DESC=Interlink naar Cetim3
SDESC=2cetim3
SPEED=11534336

DHCP=no

POINT_TO_POINT=172.16.0.105

OSPF_BROADCAST=no
OSPF_NEIGHBORS=172.16.0.105


MODE=managed
ESSID=il-nw.cetim3.wleiden.net


POLAR=Hor
ANTENNA=8080
GAIN=8dBi

DIRECTION=240
BEAMWIDTH=180
CABLE=2
HEIGTH=15

EW1