Index: /branches/releng-9.0/nanobsd/files/FILE_LISTING.txt =================================================================== --- /branches/releng-9.0/nanobsd/files/FILE_LISTING.txt (revision 10409) +++ /branches/releng-9.0/nanobsd/files/FILE_LISTING.txt (revision 10417) @@ -2,6 +2,4 @@ ./boot.config # Serial console output ./boot/loader.conf # Serial console output -./conf/default/etc/.work_around_till_fix_of_pr_134513 -./conf/default/var/.work_around_till_fix_of_pr_134513 ./etc/crontab # Extra calls for pen & ntp ./etc/namedb/named.conf # Custom named configuration @@ -9,10 +7,7 @@ ./etc/rc.conf # Highly customized rc.conf ./etc/syslog.conf # Remote syslogging enabing -./etc/ttys-nanobsd.patch # Serial console output ./root/.ssh # Template directory for authorized_keys file ./tools/change_password # Allow persistent changing of root password -./tools/dhcpd_snmp.sh # XXX ./tools/save_sshkeys # Allow persistent saving of host ssh keys -./tools/syslogd_flags.sh # XXX ./tools/updatep1 # phk image on slice 1 update script ./tools/updatep2 # phk image on slice 2 update script @@ -20,19 +15,8 @@ ./tools/wl-version # Version debug tool, gather statistics for debugging ./usr/lib/aout/.keep_me # Little hack to have /etc/rc.d/ldconfig stop nagging about missing (pruned) dir -./usr/local/bin/ssh-copy-id # XXX -./usr/local/bin/write_ntpdrift # XXX ./usr/local/etc/dhcpd-snmp.conf # dhcp-snmp cofiguration ./usr/local/etc/dhcpd.conf # Initial custom dhcpd.conf -./usr/local/etc/nrpe.cfg # XXX -./usr/local/etc/ntp.drift # XXX ./usr/local/etc/rc.d/lvrouted.sh # lvrouted startup script -./usr/local/etc/rc.d/nanobsd-motd # Allow updating motd with persistent save ./usr/local/etc/rc.d/nanobsd-save-sshkeys # Allow saving ssh-keys after generation -./usr/local/etc/rc.d/pen # Pen startup script -./usr/local/etc/rc.d/sort-proxies # Pen optimizer script -./usr/local/etc/rc.d/wlweb # WLweb configuration webinterface startup script -./usr/local/sbin/dhcpd-snmp # dhcp-snmp 'binary' -./usr/local/sbin/lvrouted.opt # lvrouted 'binary' ./usr/local/share/snmp/mibs/IEEE802dot11-MIB.txt # Draft MIB ./usr/local/share/snmp/snmpd.conf # Custom snmpd configuration -./usr/local/wlweb # WLweb configuration webinterface program Index: /branches/releng-9.0/nanobsd/files/etc/crontab =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/crontab (revision 10409) +++ /branches/releng-9.0/nanobsd/files/etc/crontab (revision 10417) @@ -26,8 +26,9 @@ 1,31 0-5 * * * root adjkerntz -a # +# WL NanoBSD Custom Rules +# # Write updates for ntp.drift to flash -0 12 * * * root /usr/local/bin/write_ntpdrift +0 12 * * * root /usr/local/sbin/store-ntpdrift # # Nagios checks -30 * * * * root /usr/local/dense/dense.sh */15 * * * * root /usr/local/sbin/check-inet-alive Index: /branches/releng-9.0/nanobsd/files/etc/local/rc.d/http302 =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/local/rc.d/http302 (revision 10417) +++ /branches/releng-9.0/nanobsd/files/etc/local/rc.d/http302 (revision 10417) @@ -0,0 +1,27 @@ +#!/bin/sh +# +# PROVIDE: http301 +# BEFORE: DAEMON +# KEYWORD: shutdown +# +# Add the following line to /etc/rc.conf to enable iperf in server mode: +# +# http302_enable="YES" +# +. /etc/rc.subr + +name=http302 +rcvar=`set_rcvar` + +command=/usr/local/bin/tcpserver +command_args="-R -H -l 0 172.31.255.1 8081 /usr/local/bin/http302 &" + +load_rc_config ${name} + +http301_enable=${http301_enable-"NO"} + +#### +# tcpserver does not generate a pid file + +run_rc_command "$1" + Index: /branches/releng-9.0/nanobsd/files/etc/local/rc.d/iperf =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/local/rc.d/iperf (revision 10417) +++ /branches/releng-9.0/nanobsd/files/etc/local/rc.d/iperf (revision 10417) @@ -0,0 +1,29 @@ +#!/bin/sh +# +# PROVIDE: iperf +# BEFORE: DAEMON +# KEYWORD: shutdown +# +# Add the following line to /etc/rc.conf to enable iperf in server mode: +# +# iperf_enable="YES" +# +. /etc/rc.subr + +name=iperf +rcvar=`set_rcvar` + +command=/usr/local/bin/iperf +command_args="-s -D" + +load_rc_config ${name} + +iperf_enable=${iperf_enable-"NO"} + +#### +# iperf does not generate a pid file +# iperf_pidfile=${iperf_pidfile-"/var/run/.pid"} +# pidfile="${iperf_pidfile}" + +run_rc_command "$1" + Index: /branches/releng-9.0/nanobsd/files/etc/local/rc.d/lvrouted =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/local/rc.d/lvrouted (revision 10417) +++ /branches/releng-9.0/nanobsd/files/etc/local/rc.d/lvrouted (revision 10417) @@ -0,0 +1,52 @@ +#!/bin/sh +# +# PROVIDE: lvrouted +# REQUIRE: netif routing +# KEYWORD: nojail + +lvrouted_enable=${lvrouted_enable:-"NO"} +lvrouted_flags=${lvrouted_flags:-} + +. /etc/rc.subr + +name="lvrouted" +rcvar=`set_rcvar` +load_rc_config $name + +command="/usr/local/sbin/${name}" +pid_file="/var/run/${name}.pid" + +# Import proxies +wleiden_conf="/usr/local/etc/wleiden.conf" +if [ -r $wleiden_conf ]; then + . ${wleiden_conf} +fi + +# If there are proxies specified, them add them with the z flag +if [ -n "$PROXIES" ]; then + PROXIES=`echo ${PROXIES} | sed 's/\ /\,/g'` + lvrouted_flags="$lvrouted_flags -z $PROXIES" +fi + +start_precmd="lvrouted_flush_routes" + +# XXX: Needs to be a flag to disable +# XXX: lvrouted should mark their added routed protocol specific (see: man 8 route) +# lvrouted requires no route to exists before start as it is not able to alter +# old routes, so make it flush all dynamic generated routes +lvrouted_flush_routes() { + + # XXX: Does the looping bug still exists? + # Keep looping till we whiped _all_ dynamic generated routes + while true; do + netstat -nr -f inet | awk '{if ($3 ~ /.*D.*/) { exit 1} }' + if [ $? -eq 0 ]; then + break + fi + echo "WARNING: Flushing all existing DYNAMIC routes" 1>&2 + netstat -nr -f inet | awk '{if ($3 ~ /.*D.*/) {print $1} }' | xargs -n 1 route delete + done +} + +run_rc_command "$1" + Index: /branches/releng-9.0/nanobsd/files/etc/local/rc.d/nanobsd-motd =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/local/rc.d/nanobsd-motd (revision 10417) +++ /branches/releng-9.0/nanobsd/files/etc/local/rc.d/nanobsd-motd (revision 10417) @@ -0,0 +1,61 @@ +#!/bin/sh +# +# $FreeBSD: src/etc/rc.d/motd,v 1.9.10.1.4.1 2009/04/15 03:14:26 kensmith Exp $ +# + +# PROVIDE: nanobsd-motd +# REQUIRE: mountcritremote +# BEFORE: LOGIN + +. /etc/rc.subr + +name="nanobsd_motd" +rcvar="update_nanobsd_motd" +start_cmd="motd_start" +stop_cmd=":" + +PERMS="644" + +motd_start() +{ + # Update kernel info in /etc/motd + # Must be done *before* interactive logins are possible + # to prevent possible race conditions. + # + echo -n 'Updating motd' + if [ ! -f /etc/motd ]; then + install -c -o root -g wheel -m ${PERMS} /dev/null /etc/motd + fi + + if [ ! -w /etc/motd ]; then + echo ' ... /etc/motd is not writable, update failed.' + return + fi + + T=`mktemp -t motd` + uname -v | sed -e 's,^\([^#]*\) #\(.* [1-2][0-9][0-9][0-9]\).*/\([^\]*\) $,\1 (\3) #\2,' > ${T} + awk '{if (NR == 1) {if ($1 == "FreeBSD") {next} else {print "\n"$0}} else {print}}' < /etc/motd >> ${T} + + cmp -s $T /etc/motd || { + # XXX: Hack quick and dirty combine of /etc/rc.d/motd and /tools/savesshkeys + trap "umount /cfg" 1 2 15 EXIT + mount /cfg + cp $T /cfg/motd + chmod ${PERMS} /etc/motd + umount /cfg + trap 1 2 15 EXIT + + trap "mount -uro noatime /" 1 2 15 EXIT + mount -uwo noatime / + cp $T /etc/motd + chmod ${PERMS} /etc/motd + mount -uro noatime / + trap 1 2 15 EXIT + } + rm -f $T + + echo . +} + +load_rc_config $name +run_rc_command "$1" Index: /branches/releng-9.0/nanobsd/files/etc/local/rc.d/nanobsd-save-sshkeys =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/local/rc.d/nanobsd-save-sshkeys (revision 10417) +++ /branches/releng-9.0/nanobsd/files/etc/local/rc.d/nanobsd-save-sshkeys (revision 10417) @@ -0,0 +1,49 @@ +#!/bin/sh +# +# $FreeBSD: ports/net/pen/files/pen.sh.in,v 1.1 2006/09/24 14:34:36 clement Exp $ +# + +# PROVIDE: pen +# REQUIRE: NETWORKING SERVERS sshd +# KEYWORD: shutdown + +# +# Add the following line to /etc/rc.conf to enable nanobsd-save-sshkeys: +# +# nanobsd_save_sshkeys_enable="YES" +# + +. /etc/rc.subr + +name=nanobsd_save_sshkeys +rcvar=`set_rcvar` + +nanobsd_save_sshkeys_enable=${nanobsd_save_sshkeys_enable:-"NO"} + +start_cmd="save_sshkeys" +stop_cmd="save_sshkeys" + +save_sshkeys() { + MOUNTED_RW=0 + trap "umount /cfg" 1 2 15 EXIT + mount -ro noatime /cfg + for FILE in /etc/ssh/ssh_host_*; do + cmp -s $FILE /cfg/ssh/`basename ${FILE}` + if [ $? -ne 0 ]; then + if [ ${MOUNTED_RW} -eq 0 ]; then + mount -uwo noatime /cfg + mkdir -p /cfg/ssh + MOUNTED_RW=1 + fi + cp $FILE /cfg/ssh/`basename ${FILE}` + fi + done + + umount /cfg + trap 1 2 15 EXIT +} + + +load_rc_config $name +run_rc_command "$1" + Index: /branches/releng-9.0/nanobsd/files/etc/local/rc.d/pen_wrapper =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/local/rc.d/pen_wrapper (revision 10417) +++ /branches/releng-9.0/nanobsd/files/etc/local/rc.d/pen_wrapper (revision 10417) @@ -0,0 +1,34 @@ +#!/bin/sh +# +# $FreeBSD: ports/net/pen/files/pen.sh.in,v 1.1 2006/09/24 14:34:36 clement Exp $ +# + +# PROVIDE: pen_wrapper +# REQUIRE: NETWORKING SERVERS +# BEFORE: DAEMON +# KEYWORD: shutdown + +# +# Add the following line to /etc/rc.conf to enable pen: +# +# pen_wrapper_enable="YES" +# + +. /etc/rc.subr + +pen_wrapper_cmd() { + ${command_interpreter} ${command} & +} + +name=pen_wrapper +rcvar=`set_rcvar` +start_cmd=${name}_cmd + +command_interpreter="/bin/sh" +command=/usr/local/bin/pen_wrapper + +pen_wrapper_enable=${pen_wrapper_enable:-"NO"} +pen_wrapper_flags=${pen_wrapper_flags:-""} + +load_rc_config $name +run_rc_command "$1" Index: anches/releng-9.0/nanobsd/files/etc/local/rc.d/pf2 =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/local/rc.d/pf2 (revision 10409) +++ (revision ) @@ -1,24 +1,0 @@ -#!/bin/sh -# -# PROVIDE: pf2 -# BEFORE: lvrouted -# KEYWORD: shutdown -# -# -# http302_enable="YES" -# -. /etc/rc.subr - -name=pf2 -rcvar=`set_rcvar` - -command=/etc/rc.d/pf -command_args="onestart" - -load_rc_config ${name} - -pf2_enable=${pf2_enable-"NO"} - - -run_rc_command "$1" - Index: /branches/releng-9.0/nanobsd/files/etc/newsyslog.conf =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/newsyslog.conf (revision 10409) +++ /branches/releng-9.0/nanobsd/files/etc/newsyslog.conf (revision 10417) @@ -37,10 +37,10 @@ /var/log/wtmp 644 3 * @01T05 B /var/log/xferlog 600 7 100 * JC +# +# WL NanoBSD Custom Log Files. As-rule-of-thumb, use syslog(4) instead custom +# created logfile because of locking issues. +# +/var/log/wlportal.log 664 3 100 * J /var/run/wlportal.pid +/var/log/snmpd.log 644 3 100 * J /var/run/snmpd.pid +/var/log/thttpd.log 644 3 100 * J /var/log/pen_wrapper.log 644 3 100 * J -/var/log/wlportal.log 664 3 100 * J /var/run/wlportal.pid -/var/log/wlweb-access.log 644 3 100 * J -/var/log/wlweb-error.log 644 3 100 * J -/var/log/snmpd.log 644 3 100 * J /var/run/snmpd.pid -/var/log/thttpd.log 644 3 100 * J /var/run/thttpd.pid - - Index: /branches/releng-9.0/nanobsd/files/etc/pf.conf =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/pf.conf (revision 10409) +++ /branches/releng-9.0/nanobsd/files/etc/pf.conf (revision 10417) @@ -1,11 +1,8 @@ -wifi_if="wlan0" all_node="172.31.255.1/32" - wl_net="172.16.0.0/12" -vpn_net="172.17.64.0/28" allow_ext_tcp="{22}" allow_ext_udp="{161}" -allow_int_tcp="{22,53,80,3128}" -allow_int_udp="{53,131,161,12345}" +allow_int_tcp="{22,3128}" +allow_int_udp="{53,161,12345}" allow_int_udp_any="{67}" @@ -18,22 +15,18 @@ nat on $int_if from $private to $wl_net -> ($int_if) +# Redirection, needs source natting and allow rules +#rdr on $ext_if inet proto tcp from any to $ext_if port 1022 -> 192.168.84.1 port 22 + # Block all -block in on $ext_if -pass in on $int_if +block in on $ext_if from any to $ext_if +block in on $int_if from any to $int_if -# Allow wl access from access point (not yet reversed) -pass on $wifi_if from $wl_net to $wl_net - -# Block this device from wifi -block in on $wifi_if inet from any to $wifi_if -block inet from any to $all_node - +# Allow private to private # Enable me to access anything -pass out on {$ext_if, $int_if, $wifi_if} keep state +pass out on {$ext_if, $int_if} keep state # Allow internet access from the network -pass in on $wifi_if inet proto tcp from $wl_net to any port $publicnat keep state -block in on $wifi_if inet proto tcp from $wl_net to $wifi_if port $publicnat -block in on $wifi_if inet proto tcp from $wl_net to $all_node port $publicnat +pass in on $int_if inet proto tcp from $wl_net to any port $publicnat keep state +block in on $int_if inet proto tcp from $wl_net to $int_if port $publicnat # Allow directives @@ -41,13 +34,7 @@ pass in on $ext_if inet proto udp from any to $ext_if port $allow_ext_udp keep state -pass in on $int_if inet proto tcp from $wl_net to $vpn_net port $allow_int_tcp keep state -pass in on $int_if inet proto udp from $wl_net to $vpn_net port $allow_int_udp keep state -pass in on $int_if inet proto icmp from $wl_net to $vpn_net keep state -pass in on $int_if inet proto udp from any to any port $allow_int_udp_any keep state - -pass in on $wifi_if inet proto tcp from $wl_net to $wl_net port $allow_int_tcp keep state -pass in on $wifi_if inet proto udp from $wl_net to $wl_net port $allow_int_udp keep state -pass in on $wifi_if inet proto icmp from $wl_net to $wl_net keep state -pass in on $wifi_if inet proto udp from any to any port $allow_int_udp_any keep state +pass in on $int_if inet proto tcp from $wl_net to $int_if port $allow_int_tcp keep state +pass in on $int_if inet proto udp from $wl_net to $int_if port $allow_int_udp keep state +pass in on $int_if inet proto icmp from $wl_net to $int_if keep state # Allow wl access from local network @@ -55,5 +42,6 @@ # Make sure to block local network access from wl -block on $wifi_if from $wl_net to $private block on $int_if from $wl_net to $private +# Otherwise lvrouted breaks: +pass in on $int_if Index: anches/releng-9.0/nanobsd/files/etc/pf.conf.ileiden =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/pf.conf.ileiden (revision 10409) +++ (revision ) @@ -1,63 +1,0 @@ -ext_if="sis0" -int_if="tap0" -wifi_if="wlan0" -all_node="172.31.255.1/32" - -wl_net="172.16.0.0/12" -vpn_net="172.17.64.0/28" - -publicnat="{80, 443, 22}" -allow_ext_tcp="{22}" -allow_ext_udp="{161}" -allow_int_tcp="{22,53,80,3128}" -allow_int_udp="{53,131,161,12345}" -allow_int_udp_any="{67}" - -private="{ 10.0.0.0/8 , 192.168.0.0/16 }" - -# Nat the internet -nat on $ext_if from $wl_net to any port $publicnat -> ($ext_if) - -# Nat local wl access -nat on $int_if from $private to $wl_net -> ($int_if) - -# Block all -block in on $ext_if -pass in on $int_if - -# Allow wl access from access point (not yet reversed) -pass on $wifi_if from $wl_net to $wl_net - -# Block this device from wifi -block in on $wifi_if inet from any to $wifi_if -block inet from any to $all_node - -# Enable me to access anything -pass out on {$ext_if, $int_if, $wifi_if} keep state - -# Allow internet access from the network -pass in on $wifi_if inet proto tcp from $wl_net to any port $publicnat keep state -block in on $wifi_if inet proto tcp from $wl_net to $wifi_if port $publicnat -block in on $wifi_if inet proto tcp from $wl_net to $all_node port $publicnat - -# Allow directives -pass in on $ext_if inet proto tcp from any to $ext_if port $allow_ext_tcp keep state -pass in on $ext_if inet proto udp from any to $ext_if port $allow_ext_udp keep state - -pass in on $int_if inet proto tcp from $wl_net to $vpn_net port $allow_int_tcp keep state -pass in on $int_if inet proto udp from $wl_net to $vpn_net port $allow_int_udp keep state -pass in on $int_if inet proto icmp from $wl_net to $vpn_net keep state -pass in on $int_if inet proto udp from any to any port $allow_int_udp_any keep state - -pass in on $wifi_if inet proto tcp from $wl_net to $wl_net port $allow_int_tcp keep state -pass in on $wifi_if inet proto udp from $wl_net to $wl_net port $allow_int_udp keep state -pass in on $wifi_if inet proto icmp from $wl_net to $wl_net keep state -pass in on $wifi_if inet proto udp from any to any port $allow_int_udp_any keep state - -# Allow wl access from local network -pass on $ext_if from $private to $wl_net keep state - -# Make sure to block local network access from wl -block on $wifi_if from $wl_net to $private -block on $int_if from $wl_net to $private - Index: /branches/releng-9.0/nanobsd/files/etc/rc.conf =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/rc.conf (revision 10409) +++ /branches/releng-9.0/nanobsd/files/etc/rc.conf (revision 10417) @@ -1,6 +1,6 @@ -## Building options -dumpdev="NO" # No kernel dumps as we don't have a place to - # store them -ipv6_network_interfaces="NONE" # No IPv6 support for now, near feature... ;-) +# No kernel dumps as we don't have a place to store them +dumpdev="NO" +# We are an router/gateway (wireless to be precise) +gateway_enable="YES" # NTP server needs working config with WL network or internet on boot @@ -24,9 +24,4 @@ sshd_flags="-u0" -# Don't update the motd as it not writeable, the update_nanobsd_motd is a -# simple wrapper found at /usr/local/etc/rc.d supporting this featureg -update_motd="NO" -update_nanobsd_motd="YES" - # Monitoring deamons nrpe2_enable="YES" @@ -40,19 +35,22 @@ nanobsd_save_sshkeys_enable="YES" -## Port extentions -# Serve our clients some pretty cool IP address to at least get connected -# Also some low-memory footprint dns resolver +# low-memory footprint DHCP and non-autoritive recursive DNS resolver dnsmasq_enable="YES" + +# Explicitly disable the memory-hungry alternatives +dhcpd_enable="NO" +named_enable="NO" named_auto_forward="YES" -named_enable="NO" -## WL ports extentions +# WL Captive Portal and WL Web Config Overview thttpd_enable="YES" http302_enable="YES" -# Make sure generated ssh keys are saved -nanobsd_save_sshkeys_enable="YES" +# Hybrid setup, requires outgoing VPN Server +openvpn_enable="NO" +openvpn_if="tap" -#Hybrid -openvpn_enable="YES" -openvpn_if="tap" +# Enable the firewall by default +pf_enable="YES" +pf_rules="/etc/pf.default.conf" +pf_flags="-D ext_if=vr0 -D int_if=vr1 -D publicnat={80,443}" Index: /branches/releng-9.0/nanobsd/files/etc/syslog.conf =================================================================== --- /branches/releng-9.0/nanobsd/files/etc/syslog.conf (revision 10409) +++ /branches/releng-9.0/nanobsd/files/etc/syslog.conf (revision 10417) @@ -31,2 +31,4 @@ !ppp *.* /var/log/ppp.log +!thttpd +*.* /var/log/thttpd.log Index: anches/releng-9.0/nanobsd/files/tools/find-nanostation =================================================================== --- /branches/releng-9.0/nanobsd/files/tools/find-nanostation (revision 10409) +++ (revision ) @@ -1,17 +1,0 @@ -#!/bin/sh -# Discover nanostation using CDPv1 packets -# Credits: http://sidewynder.blogspot.com/2005/07/tcpdump-filter-for-capturing-only.html - -if [ "x$1" = "x" ]; then - echo "Usage: $0 [count]" 1>&2 - echo "Find (lost) Nanostation IP using 'count' CDPv1 packet(s)" - echo "Normally CDPv1 packets get send every minute" 1>&2 - echo "Interface hints: `ifconfig -l`" 1>&2 - exit 1 -fi -IFACE=$1 -# By default the local and remote will announce a broadcast. -COUNT=${2-2} - - -tcpdump -nn -v -i $IFACE -s 1500 -c $COUNT 'ether[18:4] == 0x000c2000' Index: anches/releng-9.0/nanobsd/files/tools/syslogd_flag.sh =================================================================== --- /branches/releng-9.0/nanobsd/files/tools/syslogd_flag.sh (revision 10409) +++ (revision ) @@ -1,7 +1,0 @@ -#!/bin/sh -# Set hostname for syslogd -b flag - -HOST=`cat /etc/rc.conf.local | grep hostname | cut -d'"' -f2` -sed -i "" -e /syslogd_flags=/s/localhost/${HOST}/ /etc/rc.conf - - Index: anches/releng-9.0/nanobsd/files/usr/local/bin/write_ntpdrift =================================================================== --- /branches/releng-9.0/nanobsd/files/usr/local/bin/write_ntpdrift (revision 10409) +++ (revision ) @@ -1,30 +1,0 @@ -#!/bin/sh -# Back-up ntp.drift file changes to flash. - -SRC="/var/db/ntp.drift" -DST="/cfg/local/ntp.drift" - -trap "umount /cfg" 1 2 15 EXIT - -EX_OK=0 -EX_NOINPUT=66 -EX_CANTCREAT=73 - -mount -ro noatime /cfg - -# Check whether source exists -if [ ! -r $SRC ]; then - echo "ERROR: '$SRC' not readable!" 1>&2 - exit $EX_NOINPUT -fi - -# Compare files, ignore white spaces, modification, etc -diff -b -B -q ${SRC} ${DST}; RETVAL=$? -if [ $RETVAL -ne 0 ]; then - # 2: DST does not yet, exists, 1: file differs - mount -uwo noatime /cfg - mkdir -p /cfg/local - cp ${SRC} ${DST} -fi - -exit $EX_OK Index: /branches/releng-9.0/nanobsd/files/usr/local/etc/snmp/mibs/IEEE802dot11-MIB.txt =================================================================== --- /branches/releng-9.0/nanobsd/files/usr/local/etc/snmp/mibs/IEEE802dot11-MIB.txt (revision 10417) +++ /branches/releng-9.0/nanobsd/files/usr/local/etc/snmp/mibs/IEEE802dot11-MIB.txt (revision 10417) @@ -0,0 +1,2978 @@ +-- ***************************************************************** +-- IEEE802dot11-MIB : +-- IEEE 802.11 Management Information Base file +-- +-- Nov 2002, Francis Pang +-- +-- Copyright (c) 2002 by cisco Systems, Inc. +-- All rights reserved. +-- ***************************************************************** + +-- ********************************************************************** +-- * IEEE 802.11 Management Information Base +-- ********************************************************************** + +IEEE802dot11-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + NOTIFICATION-TYPE,Integer32, Counter32, + Unsigned32 FROM SNMPv2-SMI + + DisplayString , MacAddress, RowStatus, + TruthValue FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP, + NOTIFICATION-GROUP FROM SNMPv2-CONF + + ifIndex FROM RFC1213-MIB; + +-- ********************************************************************** +-- * Tree Definition +-- ********************************************************************** + + member-body OBJECT IDENTIFIER ::= { iso 2 } + us OBJECT IDENTIFIER ::= { member-body 840 } + +-- ********************************************************************** +-- * MODULE IDENTITY +-- ********************************************************************** + +ieee802dot11 MODULE-IDENTITY + LAST-UPDATED "0208300000Z" + ORGANIZATION "IEEE 802.11" + CONTACT-INFO + "WG E-mail: stds-802-11@ieee.org + + Chair: Stuart J. Kerry + Postal: Philips Semiconductors, Inc. + 1109 McKay Drive + M/S 48 SJ + San Jose, CA 95130-1706 USA + Tel: +1 408 474 7356 + Fax: +1 408 474 7247 + E-mail: stuart.kerry@philips.com + + Editor: Bob O'Hara + Postal: Informed Technology, Inc. + 1750 Nantucket Circle, Suite 138 + Santa Clara, CA 95054 USA + Tel: +1 408 986 9596 + Fax: +1 408 727 2654 + E-mail: bob@informed-technology.com" + DESCRIPTION + "The MIB module for IEEE 802.11 entities. + iso(1).member-body(2).us(840).ieee802dot11(10036)" + ::= { us 10036 } + +-- ********************************************************************** +-- * Major sections +-- ********************************************************************** + +-- Station ManagemenT (SMT) Attributes + -- DEFINED AS "The SMT object class provides the necessary support + -- at the station to manage the processes in the station such that + -- the station may work cooperatively as a part of an IEEE 802.11 + -- network." + + dot11smt OBJECT IDENTIFIER ::= { ieee802dot11 1 } + + -- dot11smt GROUPS + -- dot11StationConfigTable ::= { dot11smt 1 } + -- dot11AuthenticationAlgorithmsTable ::= { dot11smt 2 } + -- dot11WEPDefaultKeysTable ::= { dot11smt 3 } + -- dot11WEPKeyMappingsTable ::= { dot11smt 4 } + -- dot11PrivacyTable ::= { dot11smt 5 } + -- dot11SMTnotification ::= { dot11smt 6 } + -- dot11MultiDomainCapabilityTable ::= { dot11smt 7 } + +-- MAC Attributes + -- DEFINED AS "The MAC object class provides the necessary support + -- for the access control, generation, and verification of frame + -- check sequences (FCSs), and proper delivery of valid data to + -- upper layers." + + dot11mac OBJECT IDENTIFIER ::= { ieee802dot11 2 } + + -- MAC GROUPS + -- reference IEEE Std 802.1f-1993 + -- dot11OperationTable ::= { dot11mac 1 } + -- dot11CountersTable ::= { dot11mac 2 } + -- dot11GroupAddressesTable ::= { dot11mac 3 } + +-- Resource Type ID + dot11res OBJECT IDENTIFIER ::= { ieee802dot11 3 } + dot11resAttribute OBJECT IDENTIFIER ::= { dot11res 1 } + +-- PHY Attributes + -- DEFINED AS "The PHY object class provides the necessary support + -- for required PHY operational information that may vary from PHY + -- to PHY and from STA to STA to be communicated to upper layers." + + dot11phy OBJECT IDENTIFIER ::= { ieee802dot11 4 } + + -- PHY GROUPS + -- dot11PhyOperationTable ::= { dot11phy 1 } + -- dot11PhyAntennaTable ::= { dot11phy 2 } + -- dot11PhyTxPowerTable ::= { dot11phy 3 } + -- dot11PhyFHSSTable ::= { dot11phy 4 } + -- dot11PhyDSSSTable ::= { dot11phy 5 } + -- dot11PhyIRTable ::= { dot11phy 6 } + -- dot11RegDomainsSupportedTable ::= { dot11phy 7 } + -- dot11AntennasListTable ::= { dot11phy 8 } + -- dot11SupportedDataRatesTxTable ::= { dot11phy 9 } + -- dot11SupportedDataRatesRxTable ::= { dot11phy 10 } + -- dot11PhyOFDMTable ::= { dot11phy 11 } + -- dot11PhyHRDSSSTable ::= { dot11phy 12 } + -- dot11EHCCHoppingPatternTable ::= { dot11phy 13 } + +-- ********************************************************************** +-- * Textual conventions from 802 definitions +-- ********************************************************************** + + WEPKeytype ::= OCTET STRING (SIZE (5)) + +-- ********************************************************************** +-- * MIB attribute OBJECT-TYPE definitions follow +-- ********************************************************************** + +-- ********************************************************************** +-- * SMT Station Config Table +-- ********************************************************************** + +dot11StationConfigTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11StationConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Station Configuration attributes. In tablular form to + allow for multiple instances on an agent." + ::= { dot11smt 1 } + +dot11StationConfigEntry OBJECT-TYPE + SYNTAX Dot11StationConfigEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11StationConfigTable. It is + possible for there to be multiple IEEE 802.11 interfaces + on one agent, each with its unique MAC address. The + relationship between an IEEE 802.11 interface and an + interface in the context of the Internet-standard MIB is + one-to-one. As such, the value of an ifIndex object + instance can be directly used to identify corresponding + instances of the objects defined herein. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11StationConfigTable 1 } + +Dot11StationConfigEntry ::= + SEQUENCE { + dot11StationID MacAddress, + dot11MediumOccupancyLimit INTEGER, + dot11CFPollable TruthValue, + dot11CFPPeriod INTEGER, + dot11CFPMaxDuration INTEGER, + dot11AuthenticationResponseTimeOut Unsigned32, + dot11PrivacyOptionImplemented TruthValue, + dot11PowerManagementMode INTEGER, + dot11DesiredSSID OCTET STRING, + dot11DesiredBSSType INTEGER, + dot11OperationalRateSet OCTET STRING, + dot11BeaconPeriod INTEGER, + dot11DTIMPeriod INTEGER, + dot11AssociationResponseTimeOut Unsigned32, + dot11DisassociateReason INTEGER, + dot11DisassociateStation MacAddress, + dot11DeauthenticateReason INTEGER, + dot11DeauthenticateStation MacAddress, + dot11AuthenticateFailStatus INTEGER, + dot11AuthenticateFailStation MacAddress, + dot11MultiDomainCapabilityImplemented TruthValue, + dot11MultiDomainCapabilityEnabled TruthValue, + dot11CountryString OCTET STRING } + +dot11StationID OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The purpose of dot11StationID is to allow a manager to + identify a station for its own purposes. This attribute + provides for that eventuality while keeping the true MAC + address independent. Its syntax is MAC address, and the + default value is the station's assigned, unique + MAC address." + ::= { dot11StationConfigEntry 1 } + +dot11MediumOccupancyLimit OBJECT-TYPE + SYNTAX INTEGER (0..1000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the maximum amount of time, + in TU, that a point coordinator (PC) may control the usage + of the wireless medium (WM) without relinquishing control + for long enough to allow at least one instance of DCF access + to the medium. The default value of this attribute shall + be 100, and the maximum value shall be 1000." + ::= { dot11StationConfigEntry 2 } + +dot11CFPollable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "When this attribute is true, it shall indicate that + the STA is able to respond to a CF-Poll with a data frame + within a SIFS time. This attribute shall be false if + the STA is not able to respond to a CF-Poll with a data + frame within a SIFS time." + ::= { dot11StationConfigEntry 3 } + +dot11CFPPeriod OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The attribute shall describe the number of DTIM intervals + between the start of CFPs. It is modified by + MLME-START.request primitive." + ::= { dot11StationConfigEntry 4 } + +dot11CFPMaxDuration OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The attribute shall describe the maximum duration of + the CFP in TU that may be generated by the PCF. It is + modified by MLME-START.request primitive." + ::= { dot11StationConfigEntry 5 } + +dot11AuthenticationResponseTimeOut OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the number of time units (TUs) + that a responding STA should wait for the next frame in the + authentication sequence." + ::= { dot11StationConfigEntry 6 } + +dot11PrivacyOptionImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute, when true, shall indicate that the IEEE + 802.11 WEP option is implemented. The default value of + this attribute shall be false." + ::= { dot11StationConfigEntry 7 } + +dot11PowerManagementMode OBJECT-TYPE + SYNTAX INTEGER { active(1), powersave(2) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the power management + mode of the STA. When set to active, it shall + indicate that the station is not in power-save + (PS) mode. When set to powersave, it shall indicate + that the station is in power-save mode. The power + management mode is transmitted in all frames + according to the rules in 7.1.3.1.7." + ::= { dot11StationConfigEntry 8 } + +dot11DesiredSSID OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute reflects the Service Set ID (SSID) + used in the DesiredSSID parameter of the most recent + MLME_Scan.request. This value may be modified + by an external management entity and used by the + local SME to make decisions about the Scanning + process." + ::= { dot11StationConfigEntry 9 } + +dot11DesiredBSSType OBJECT-TYPE + SYNTAX INTEGER { infrastructure(1), independent(2), any(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the type of BSS the + station shall use when scanning for a BSS with + which to synchronize. This value is used to filter + Probe Response frames and Beacons. When set to + infrastructure, the station shall only synchronize + with a BSS whose Capability Information field has + the ESS subfield set to 1. When set to independent, + the station shall only synchronize with a BSS whose + Capability Information field has the IBSS subfield + set to 1. When set to any, the station may + synchronize to either type of BSS." + ::= { dot11StationConfigEntry 10 } + +dot11OperationalRateSet OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(1..126)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the set of data + rates at which the station may transmit data. + Each octet contains a value representing a rate. + Each rate shall be within the range from 2 to 127, + corresponding to data rates in increments of + 500 kbit/s from 1 Mbit/s to 63.5 Mbit/s, and shall + be supported (as indicated in the supported rates + table) for receiving data. This value is reported in + transmitted Beacon, Probe Request, Probe Response, + Association Request, Association Response, + Reassociation Request, and Reassociation Response + frames, and is used to determine whether a BSS + with which the station desires to synchronize is + suitable. It is also used when starting a BSS, + as specified in 10.3." + ::= { dot11StationConfigEntry 11 } + +dot11BeaconPeriod OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the number of TUs that + a station shall use for scheduling Beacon + transmissions. This value is transmitted in Beacon + and Probe Response frames." + ::= { dot11StationConfigEntry 12 } + +dot11DTIMPeriod OBJECT-TYPE + SYNTAX INTEGER(1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the number of beacon + intervals that shall elapse between transmission of + Beacons frames containing a TIM element whose DTIM + Count field is 0. This value is transmitted in + the DTIM Period field of Beacon frames." + ::= { dot11StationConfigEntry 13 } + +dot11AssociationResponseTimeOut OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the number of TU that a + requesting STA should wait for a response to a + transmitted association-request MMPDU." + ::= { dot11StationConfigEntry 14 } + +dot11DisassociateReason OBJECT-TYPE + SYNTAX INTEGER(0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the most recently + transmitted Reason Code in a Disassociation + frame. If no Disassociation frame has been + transmitted, the value of this attribute shall + be 0." + REFERENCE "IEEE Std 802.11-2002, 7.3.1.7" + ::= { dot11StationConfigEntry 15 } + +dot11DisassociateStation OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the MAC address from the + Address 1 field of the most recently transmitted + Disassociation frame. If no Disassociation + frame has been transmitted, the value of this + attribute shall be 0." + ::= { dot11StationConfigEntry 16 } + +dot11DeauthenticateReason OBJECT-TYPE + SYNTAX INTEGER(0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the most recently + transmitted Reason Code in a Deauthentication + frame. If no Deauthentication frame has been + transmitted, the value of this attribute shall + be 0." + REFERENCE "IEEE Std 802.11-2002, 7.3.1.7" + ::= { dot11StationConfigEntry 17 } + +dot11DeauthenticateStation OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the MAC address from the + Address 1 field of the most recently transmitted + Deauthentication frame. If no Deauthentication + frame has been transmitted, the value of this + attribute shall be 0." + ::= { dot11StationConfigEntry 18 } + +dot11AuthenticateFailStatus OBJECT-TYPE + SYNTAX INTEGER(0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the most recently + transmitted Status Code in a failed + Authentication frame. If no failed + Authentication frame has been transmitted, the + value of this attribute shall be 0." + REFERENCE "IEEE Std 802.11-2002, 7.3.1.9" + ::= { dot11StationConfigEntry 19 } + +dot11AuthenticateFailStation OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute holds the MAC address from the + Address 1 field of the most recently transmitted + failed Authentication frame. If no failed + Authentication frame has been transmitted, the + value of this attribute shall be 0." + ::= { dot11StationConfigEntry 20 } + +dot11MultiDomainCapabilityImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute, when TRUE, indicates that the + station implementation is capable of supporting + multiple regulatory domains. The capability is + disabled, otherwise. The default value of this + attribute is FALSE." + ::= { dot11StationConfigEntry 21 } + +dot11MultiDomainCapabilityEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute, when TRUE, indicates that the + capability of the station to operate in multiple + regulatory domains is enabled. The capability is + disabled, otherwise. The default value of this + attribute is FALSE." + ::= { dot11StationConfigEntry 22 } + +dot11CountryString OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(3)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute identifies the country in which the + station is operating. The first two octets of this + string is the two character country code as described + in document ISO/IEC 3166-1. The third octet shall + be one of the following: + + 1. an ASCII space character, if the regulations under + which the station is operating encompass all + environments in the country, + + 2. an ASCII 'O' character, if the regulations under + which the station is operating are for an Outdoor + environment only, or + + 3. an ASCII 'I' character, if the regulations under + which the station is operating are for an Indoor + environment only." + ::= { dot11StationConfigEntry 23 } + +-- ********************************************************************** +-- * End of dot11StationConfig TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * AuthenticationAlgorithms TABLE +-- ********************************************************************** + +dot11AuthenticationAlgorithmsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11AuthenticationAlgorithmsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This (conceptual) table of attributes shall be a set of + all the authentication algorithms supported by the + stations. The following are the default values and the + associated algorithm: + Value = 1: Open System + Value = 2: Shared Key" + REFERENCE "IEEE Std 802.11-2002, 7.3.1.1" + ::= { dot11smt 2 } + +dot11AuthenticationAlgorithmsEntry OBJECT-TYPE + SYNTAX Dot11AuthenticationAlgorithmsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An Entry (conceptual row) in the Authentication + Algorithms Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11AuthenticationAlgorithmsIndex } + ::= { dot11AuthenticationAlgorithmsTable 1 } + +Dot11AuthenticationAlgorithmsEntry ::= + SEQUENCE { dot11AuthenticationAlgorithmsIndex Integer32, + dot11AuthenticationAlgorithm INTEGER, + dot11AuthenticationAlgorithmsEnable TruthValue } + +dot11AuthenticationAlgorithmsIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The auxiliary variable used to identify instances + of the columnar objects in the Authentication Algorithms Table." + ::= { dot11AuthenticationAlgorithmsEntry 1 } + +dot11AuthenticationAlgorithm OBJECT-TYPE + SYNTAX INTEGER { openSystem(1), sharedKey(2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute shall be a set of all the authentication + algorithms supported by the STAs. The following are the + default values and the associated algorithm. + Value = 1: Open System + Value = 2: Shared Key" + ::= { dot11AuthenticationAlgorithmsEntry 2 } + +dot11AuthenticationAlgorithmsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute, when true at a station, shall enable the acceptance + of the authentication algorithm described in the corresponding table + entry in authentication frames received by the station that have odd + authentication sequence numbers. The default value of this attribute + shall be 1 for the Open System table entry and 2 for all other table + entries." + ::= { dot11AuthenticationAlgorithmsEntry 3 } + +-- ********************************************************************** +-- * End of AuthenticationAlgorithms TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * WEPDefaultKeys TABLE +-- ********************************************************************** + +dot11WEPDefaultKeysTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11WEPDefaultKeysEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Conceptual table for WEP default keys. This table shall + contain the four WEP default secret key values + corresponding to the four possible KeyID values. The WEP + default secret keys are logically WRITE-ONLY. Attempts to + read the entries in this table shall return unsuccessful + status and values of null or zero. The default value of + each WEP default key shall be null." + REFERENCE "IEEE Std 802.11-2002, 8.3.2" + ::= { dot11smt 3 } + +dot11WEPDefaultKeysEntry OBJECT-TYPE + SYNTAX Dot11WEPDefaultKeysEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An Entry (conceptual row) in the WEP Default Keys Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11WEPDefaultKeyIndex} + ::= { dot11WEPDefaultKeysTable 1 } + +Dot11WEPDefaultKeysEntry ::= + SEQUENCE { dot11WEPDefaultKeyIndex INTEGER, + dot11WEPDefaultKeyValue WEPKeytype } + +dot11WEPDefaultKeyIndex OBJECT-TYPE + SYNTAX INTEGER (1..4) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The auxiliary variable used to identify instances + of the columnar objects in the WEP Default Keys Table. + The value of this variable is equal to the WEPDefaultKeyID + 1" + ::= { dot11WEPDefaultKeysEntry 1 } + +dot11WEPDefaultKeyValue OBJECT-TYPE + SYNTAX WEPKeytype + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A WEP default secret key value." + ::= { dot11WEPDefaultKeysEntry 2 } + +-- ********************************************************************** +-- * End of WEPDefaultKeys TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * WEPKeyMappings TABLE +-- ********************************************************************** + +dot11WEPKeyMappingsTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11WEPKeyMappingsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Conceptual table for WEP Key Mappings. The MIB supports + the ability to share a separate WEP key for each RA/TA + pair. The Key Mappings Table contains zero or one entry + for each MAC address and contains two fields for each + entry: WEPOn and the corresponding WEP key. The WEP key + mappings are logically WRITE-ONLY. Attempts to read the + entries in this table shall return unsuccessful status and + values of null or zero. The default value for all WEPOn + fields is false." + REFERENCE "IEEE Std 802.11-2002, 8.3.2" + ::= { dot11smt 4 } + +dot11WEPKeyMappingsEntry OBJECT-TYPE + SYNTAX Dot11WEPKeyMappingsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An Entry (conceptual row) in the WEP Key Mappings Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11WEPKeyMappingIndex } + ::= { dot11WEPKeyMappingsTable 1 } + +Dot11WEPKeyMappingsEntry ::= + SEQUENCE { dot11WEPKeyMappingIndex Integer32, + dot11WEPKeyMappingAddress MacAddress, + dot11WEPKeyMappingWEPOn TruthValue, + dot11WEPKeyMappingValue WEPKeytype, + dot11WEPKeyMappingStatus RowStatus } + +dot11WEPKeyMappingIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The auxiliary variable used to identify instances + of the columnar objects in the WEP Key Mappings Table." + ::= { dot11WEPKeyMappingsEntry 1 } + +dot11WEPKeyMappingAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The MAC address of the STA for which the values from this + key mapping entry are to be used." + ::= { dot11WEPKeyMappingsEntry 2 } + +dot11WEPKeyMappingWEPOn OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Boolean as to whether WEP is to be used when communicating + with the dot11WEPKeyMappingAddress STA." + ::= { dot11WEPKeyMappingsEntry 3 } + +dot11WEPKeyMappingValue OBJECT-TYPE + SYNTAX WEPKeytype + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A WEP secret key value." + ::= { dot11WEPKeyMappingsEntry 4 } + +dot11WEPKeyMappingStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status column used for creating, modifying, and + deleting instances of the columnar objects in the WEP key + mapping Table." + DEFVAL { active } + ::= { dot11WEPKeyMappingsEntry 5 } + +-- ********************************************************************** +-- * End of WEPKeyMappings TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PrivacyTable TABLE +-- ********************************************************************** + +dot11PrivacyTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PrivacyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group containing attributes concerned with IEEE 802.11 + Privacy. Created as a table to allow multiple + instantiations on an agent." + ::= { dot11smt 5 } + +dot11PrivacyEntry OBJECT-TYPE + SYNTAX Dot11PrivacyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PrivacyTable Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PrivacyTable 1 } + +Dot11PrivacyEntry ::= + SEQUENCE { dot11PrivacyInvoked TruthValue, + dot11WEPDefaultKeyID INTEGER, + dot11WEPKeyMappingLength Unsigned32, + dot11ExcludeUnencrypted TruthValue, + dot11WEPICVErrorCount Counter32, + dot11WEPExcludedCount Counter32 } + +dot11PrivacyInvoked OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this attribute is true, it shall indicate that the IEEE + 802.11 WEP mechanism is used for transmitting frames of type + Data. The default value of this attribute shall be false." + ::= { dot11PrivacyEntry 1 } + +dot11WEPDefaultKeyID OBJECT-TYPE + SYNTAX INTEGER (0..3) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the use of the first, + second, third, or fourth element of the WEPDefaultKeys + array when set to values of zero, one, two, or three. The + default value of this attribute shall be 0." + REFERENCE "IEEE Std 802.11-2002, 8.3.2" + ::= { dot11PrivacyEntry 2 } + +dot11WEPKeyMappingLength OBJECT-TYPE + SYNTAX Unsigned32 (10..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The maximum number of tuples that dot11WEPKeyMappings can hold." + REFERENCE "IEEE Std 802.11-2002, 8.3.2" + ::= { dot11PrivacyEntry 3 } + +dot11ExcludeUnencrypted OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this attribute is true, the STA shall not indicate at + the MAC service interface received MSDUs that have the WEP + subfield of the Frame Control field equal to zero. When this + attribute is false, the STA may accept MSDUs that have the WEP + subfield of the Frame Control field equal to zero. The default + value of this attribute shall be false." + ::= { dot11PrivacyEntry 4 } + +dot11WEPICVErrorCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when a frame is received with the + WEP subfield of the Frame Control field set to one and the value + of the ICV as received in the frame does not match the ICV value + that is calculated for the contents of the received frame." + ::= { dot11PrivacyEntry 5 } + +dot11WEPExcludedCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when a frame is received with the + WEP subfield of the Frame Control field set to zero and the value + of dot11ExcludeUnencrypted causes that frame to be discarded." + ::= { dot11PrivacyEntry 6 } + +-- ********************************************************************** +-- * End of dot11Privacy TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * SMT notification Objects +-- ********************************************************************** + +dot11SMTnotification OBJECT IDENTIFIER ::= { dot11smt 6 } + +dot11Disassociate NOTIFICATION-TYPE + OBJECTS { ifIndex, dot11DisassociateReason, dot11DisassociateStation } + STATUS current + DESCRIPTION + "The disassociate notification shall be sent when the STA + sends a Disassociation frame. The value of the notification + shall include the MAC address of the MAC to which the Disassociation + frame was sent and the reason for the disassociation. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + ::= { dot11SMTnotification 0 1 } + +dot11Deauthenticate NOTIFICATION-TYPE + OBJECTS { ifIndex, dot11DeauthenticateReason, dot11DeauthenticateStation } + STATUS current + DESCRIPTION + "The deauthenticate notification shall be sent when the STA + sends a Deauthentication frame. The value of the notification + shall include the MAC address of the MAC to which the Deauthentication + frame was sent and the reason for the deauthentication. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + ::= { dot11SMTnotification 0 2 } + +dot11AuthenticateFail NOTIFICATION-TYPE + OBJECTS { ifIndex, dot11AuthenticateFailStatus, dot11AuthenticateFailStation } + STATUS current + DESCRIPTION + "The authenticate failure notification shall be sent when the STA + sends an Authentication frame with a status code other than + 'successful'. The value of the notification + shall include the MAC address of the MAC to which the Authentication + frame was sent and the reason for the authentication failure. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + ::= { dot11SMTnotification 0 3 } + + +-- ********************************************************************** +-- * End of SMT notification Objects +-- ********************************************************************** + +-- ******************************************************************** +-- * dot11MultiDomainCapability TABLE +-- ******************************************************************** + +dot11MultiDomainCapabilityTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11MultiDomainCapabilityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This (conceptual) table of attributes for + cross-domain mobility." + ::= { dot11smt 7 } + +dot11MultiDomainCapabilityEntry OBJECT-TYPE + SYNTAX Dot11MultiDomainCapabilityEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the Multiple Domain + Capability Table. + + IfIndex - Each IEEE 802.11 interface is represented + by an ifEntry. Interface tables in this MIB are + indexed by ifIndex." + INDEX { ifIndex, + dot11MultiDomainCapabilityIndex } + ::= { dot11MultiDomainCapabilityTable 1 } + +Dot11MultiDomainCapabilityEntry ::= + SEQUENCE { dot11MultiDomainCapabilityIndex Integer32, + dot11FirstChannelNumber Integer32, + dot11NumberofChannels Integer32, + dot11MaximumTransmitPowerLevel Integer32 } + +dot11MultiDomainCapabilityIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The auxiliary variable used to identify instances of + the columnar objects in the Multi Domain Capability Table." + ::= { dot11MultiDomainCapabilityEntry 1 } + +dot11FirstChannelNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the value of the lowest + channel number in the subband for the associated domain + country string. The default value of this attribute + shall be zero." + ::= { dot11MultiDomainCapabilityEntry 2 } + +dot11NumberofChannels OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the value of the total + number of channels allowed in the subband for the + associated domain country string. The default value of + this attribute shall be zero." + ::= { dot11MultiDomainCapabilityEntry 3 } + +dot11MaximumTransmitPowerLevel OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the maximum transmit power, + in dBm, allowed in the subband for the associated domain + country string. The default value of this attribute shall + be zero." + ::= { dot11MultiDomainCapabilityEntry 4 } + +-- ******************************************************************** +-- * End of dot11MultiDomainCapability TABLE +-- ******************************************************************** + + +-- ********************************************************************** +-- * MAC Attribute Templates +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11OperationTable TABLE +-- ********************************************************************** + +dot11OperationTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11OperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group contains MAC attributes pertaining to the operation + of the MAC. This has been implemented as a table in order + to allow for multiple instantiations on an agent." + ::= { dot11mac 1 } + +dot11OperationEntry OBJECT-TYPE + SYNTAX Dot11OperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11OperationEntry Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11OperationTable 1 } + +Dot11OperationEntry ::= + SEQUENCE { dot11MACAddress MacAddress, + dot11RTSThreshold INTEGER, + dot11ShortRetryLimit INTEGER, + dot11LongRetryLimit INTEGER, + dot11FragmentationThreshold INTEGER, + dot11MaxTransmitMSDULifetime Unsigned32, + dot11MaxReceiveLifetime Unsigned32, + dot11ManufacturerID DisplayString, + dot11ProductID DisplayString } + +dot11MACAddress OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Unique MAC Address assigned to the STA." + ::= { dot11OperationEntry 1 } + +dot11RTSThreshold OBJECT-TYPE + SYNTAX INTEGER (0..2347) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the number of octets in an MPDU, + below which an RTS/CTS handshake shall not be performed. An + RTS/CTS handshake shall be performed at the beginning of any + frame exchange sequence where the MPDU is of type Data or + Management, the MPDU has an individual address in the Address1 + field, and the length of the MPDU is greater than + this threshold. (For additional details, refer to Table 21 in + 9.7.) Setting this attribute to be larger than the maximum + MSDU size shall have the effect of turning off the RTS/CTS + handshake for frames of Data or Management type transmitted by + this STA. Setting this attribute to zero shall have the effect + of turning on the RTS/CTS handshake for all frames of Data or + Management type transmitted by this STA. The default value of + this attribute shall be 2347." + ::= { dot11OperationEntry 2 } + +dot11ShortRetryLimit OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the maximum number of + transmission attempts of a frame, the length of which is less + than or equal to dot11RTSThreshold, that shall be made before a + failure condition is indicated. The default value of this + attribute shall be 7." + ::= { dot11OperationEntry 3 } + +dot11LongRetryLimit OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the maximum number of + transmission attempts of a frame, the length of which is + greater than dot11RTSThreshold, that shall be made before a + failure condition is indicated. The default value of this + attribute shall be 4." + ::= { dot11OperationEntry 4 } + +dot11FragmentationThreshold OBJECT-TYPE + SYNTAX INTEGER (256..2346) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall specify the current maximum size, in + octets, of the MPDU that may be delivered to the PHY. An MSDU + shall be broken into fragments if its size exceeds the value + of this attribute after adding MAC headers and trailers. An MSDU + or MMPDU shall be fragmented when the resulting frame has an + individual address in the Address1 field, and the length of the + frame is larger than this threshold. The default value for this + attribute shall be the lesser of 2346 or the aMPDUMaxLength of + the attached PHY and shall never exceed the lesser of 2346 or + the aMPDUMaxLength of the attached PHY. The value of this + attribute shall never be less than 256. " + ::= { dot11OperationEntry 5 } + +dot11MaxTransmitMSDULifetime OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MaxTransmitMSDULifetime shall be the elapsed time in TU, + after the initial transmission of an MSDU, after which further + attempts to transmit the MSDU shall be terminated. The default + value of this attribute shall be 512." + ::= { dot11OperationEntry 6 } + +dot11MaxReceiveLifetime OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The MaxReceiveLifetime shall be the elapsed time in TU, + after the initial reception of a fragmented MMPDU or MSDU, + after which further attempts to reassemble the MMPDU or + MSDU shall be terminated. The default value shall be + 512." + ::= { dot11OperationEntry 7 } + +dot11ManufacturerID OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ManufacturerID shall include, at a minimum, the name + of the manufacturer. It may include additional + information at the manufacturer's discretion. The default + value of this attribute shall be null." + ::= { dot11OperationEntry 8 } + +dot11ProductID OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ProductID shall include, at a minimum, an identifier + that is unique to the manufacturer. It may include + additional information at the manufacturer's discretion. + The default value of this attribute shall be null." + ::= { dot11OperationEntry 9 } + +-- ********************************************************************** +-- * End of dot11OperationEntry TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11Counters TABLE +-- ********************************************************************** + +dot11CountersTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11CountersEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group containing attributes that are MAC counters. + Implemented as a table to allow for multiple + instantiations on an agent." + ::= { dot11mac 2 } + +dot11CountersEntry OBJECT-TYPE + SYNTAX Dot11CountersEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11CountersEntry Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11CountersTable 1 } + +Dot11CountersEntry ::= + SEQUENCE { dot11TransmittedFragmentCount Counter32, + dot11MulticastTransmittedFrameCount Counter32, + dot11FailedCount Counter32, + dot11RetryCount Counter32, + dot11MultipleRetryCount Counter32, + dot11FrameDuplicateCount Counter32, + dot11RTSSuccessCount Counter32, + dot11RTSFailureCount Counter32, + dot11ACKFailureCount Counter32, + dot11ReceivedFragmentCount Counter32, + dot11MulticastReceivedFrameCount Counter32, + dot11FCSErrorCount Counter32, + dot11TransmittedFrameCount Counter32, + dot11WEPUndecryptableCount Counter32 } + +dot11TransmittedFragmentCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall be incremented for an acknowledged MPDU + with an individual address in the address 1 field or an MPDU + with a multicast address in the address 1 field of type Data + or Management." + ::= { dot11CountersEntry 1 } + +dot11MulticastTransmittedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment only when the multicast bit + is set in the destination MAC address of a successfully + transmitted MSDU. When operating as a STA in an ESS, where + these frames are directed to the AP, this implies having + received an acknowledgment to all associated MPDUs." + ::= { dot11CountersEntry 2 } + +dot11FailedCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when an MSDU is not transmitted + successfully due to the number of transmit attempts exceeding + either the dot11ShortRetryLimit or dot11LongRetryLimit." + ::= { dot11CountersEntry 3 } + +dot11RetryCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when an MSDU is successfully + transmitted after one or more retransmissions." + ::= { dot11CountersEntry 4 } + +dot11MultipleRetryCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when an MSDU is successfully + transmitted after more than one retransmission." + ::= { dot11CountersEntry 5 } + +dot11FrameDuplicateCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when a frame is received + that the Sequence Control field indicates is a + duplicate." + ::= { dot11CountersEntry 6 } + +dot11RTSSuccessCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when a CTS is received in + response to an RTS." + ::= { dot11CountersEntry 7 } + +dot11RTSFailureCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when a CTS is not received in + response to an RTS." + ::= { dot11CountersEntry 8 } + +dot11ACKFailureCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when an ACK is not received + when expected." + ::= { dot11CountersEntry 9 } + +dot11ReceivedFragmentCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall be incremented for each successfully + received MPDU of type Data or Management." + ::= { dot11CountersEntry 10 } + +dot11MulticastReceivedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when a MSDU is received + with the multicast bit set in the destination + MAC address." + ::= { dot11CountersEntry 11 } + +dot11FCSErrorCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when an FCS error is + detected in a received MPDU." + ::= { dot11CountersEntry 12 } + +dot11TransmittedFrameCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment for each successfully transmitted MSDU." + ::= { dot11CountersEntry 13 } + +dot11WEPUndecryptableCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This counter shall increment when a frame is received with + the WEP subfield of the Frame Control field set to one and the + WEPOn value for the key mapped to the TA's MAC address + indicates that the frame should not have been encrypted or + that frame is discarded due to the receiving STA not + implementing the privacy option." + ::= { dot11CountersEntry 14 } + +-- ********************************************************************** +-- * End of dot11CountersEntry TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * GroupAddresses TABLE +-- ********************************************************************** + +dot11GroupAddressesTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11GroupAddressesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A conceptual table containing a set of MAC addresses + identifying the multicast addresses for which this STA + will receive frames. The default value of this attribute + shall be null." + ::= { dot11mac 3 } + +dot11GroupAddressesEntry OBJECT-TYPE + SYNTAX Dot11GroupAddressesEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An Entry (conceptual row) in the Group Addresses Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11GroupAddressesIndex} + ::= { dot11GroupAddressesTable 1 } + +Dot11GroupAddressesEntry ::= + SEQUENCE { dot11GroupAddressesIndex Integer32, + dot11Address MacAddress, + dot11GroupAddressesStatus RowStatus } + +dot11GroupAddressesIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The auxiliary variable used to identify instances + of the columnar objects in the Group Addresses Table." + ::= { dot11GroupAddressesEntry 1 } + +dot11Address OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "MAC address identifying a multicast addresses + from which this STA will receive frames." + ::= { dot11GroupAddressesEntry 2 } + +dot11GroupAddressesStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The status column used for creating, modifying, and + deleting instances of the columnar objects in the Group + Addresses Table." + DEFVAL { active } + ::= { dot11GroupAddressesEntry 3 } + +-- ********************************************************************** +-- * End of GroupAddress TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * Resource Type Attribute Templates +-- ********************************************************************** + +dot11ResourceTypeIDName OBJECT-TYPE + SYNTAX DisplayString (SIZE(4)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Contains the name of the Resource Type ID managed object. + The attribute is read-only and always contains the value + RTID. This attribute value shall not be used as a naming + attribute for any other managed object class." + REFERENCE "IEEE Std 802.1F-1993, A.7" + DEFVAL { "RTID" } + ::= { dot11resAttribute 1 } + +-- ********************************************************************** +-- * dot11ResourceInfo TABLE +-- ********************************************************************** + +dot11ResourceInfoTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11ResourceInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Provides a means of indicating, in data readable from a + managed object, information that identifies the source of + the implementation." + REFERENCE "IEEE Std 802.1F-1993, A.7" + ::= { dot11resAttribute 2 } + +dot11ResourceInfoEntry OBJECT-TYPE + SYNTAX Dot11ResourceInfoEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11ResourceInfo Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11ResourceInfoTable 1 } + +Dot11ResourceInfoEntry ::= + SEQUENCE { dot11manufacturerOUI OCTET STRING, + dot11manufacturerName DisplayString, + dot11manufacturerProductName DisplayString, + dot11manufacturerProductVersion DisplayString } + +dot11manufacturerOUI OBJECT-TYPE + SYNTAX OCTET STRING (SIZE(3)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Takes the value of an organizationally unique identifier." + ::= { dot11ResourceInfoEntry 1 } + +dot11manufacturerName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A printable string used to identify the manufacturer of the + resource. Maximum string length is 128 octets." + ::= { dot11ResourceInfoEntry 2 } + +dot11manufacturerProductName OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A printable string used to identify the manufacturer's product + name of the resource. Maximum string length is 128 octets." + ::= { dot11ResourceInfoEntry 3 } + +dot11manufacturerProductVersion OBJECT-TYPE + SYNTAX DisplayString (SIZE(0..128)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Printable string used to identify the manufacturer's product + version of the resource. Maximum string length is 128 octets." + ::= { dot11ResourceInfoEntry 4 } + +-- ********************************************************************** +-- * End of dot11ResourceInfo TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * PHY Attribute Templates +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PhyOperation TABLE +-- ********************************************************************** + +dot11PhyOperationTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyOperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "PHY level attributes concerned with + operation. Implemented as a table indexed on + + ifIndex to allow for multiple instantiations on an + Agent." + ::= { dot11phy 1 } + +dot11PhyOperationEntry OBJECT-TYPE + SYNTAX Dot11PhyOperationEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyOperation Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyOperationTable 1 } + +Dot11PhyOperationEntry ::= + SEQUENCE { dot11PHYType INTEGER, + dot11CurrentRegDomain Integer32, + dot11TempType INTEGER } + +dot11PHYType OBJECT-TYPE + SYNTAX INTEGER { fhss(1), dsss(2), irbaseband(3), ofdm(4), + hrdsss(5) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is an 8-bit integer value that identifies the PHY type + supported by the attached PLCP and PMD. Currently defined + values and their corresponding PHY types are: + + FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, + OFDM 5GHz = 04, HRDSSS = 05" + ::= { dot11PhyOperationEntry 1 } + +dot11CurrentRegDomain OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current regulatory domain this instance of the PMD is + supporting. This object corresponds to one of the + RegDomains listed in dot11RegDomainsSupported." + ::= { dot11PhyOperationEntry 2 } + +dot11TempType OBJECT-TYPE + SYNTAX INTEGER { tempType1(1), tempType2(2) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "There are different operating temperature requirements + dependent on the anticipated environmental conditions. This + attribute describes the current PHY's operating temperature + range capability. Currently defined values and their + corresponding temperature ranges are: + + Type 1 = X'01'-Commercial range of 0 to 40 degrees C, + + Type 2 = X'02'-Industrial range of -30 to 70 degrees C." + ::= { dot11PhyOperationEntry 3 } + +-- ********************************************************************** +-- * End of dot11PhyOperation TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PhyAntenna TABLE +-- ********************************************************************** + +dot11PhyAntennaTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyAntennaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group of attributes for PhyAntenna. Implemented as a + table indexed on ifIndex to allow for multiple instances on + an agent." + ::= { dot11phy 2} + +dot11PhyAntennaEntry OBJECT-TYPE + SYNTAX Dot11PhyAntennaEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyAntenna Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyAntennaTable 1 } + +Dot11PhyAntennaEntry ::= + SEQUENCE { dot11CurrentTxAntenna Integer32, + dot11DiversitySupport INTEGER, + dot11CurrentRxAntenna Integer32 } + +dot11CurrentTxAntenna OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current antenna being used to transmit. This value + is one of the values appearing in dot11SupportedTxAntenna. This + may be used by a management agent to control which antenna is + used for transmission. " + ::= { dot11PhyAntennaEntry 1 } + +dot11DiversitySupport OBJECT-TYPE + SYNTAX INTEGER { fixedlist(1), notsupported(2), dynamic(3) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This implementation's support for diversity, encoded as: + + X'01'-diversity is available and is performed over the fixed + list of antennas defined in dot11DiversitySelectionRx. + + X'02'-diversity is not supported. + + X'03'-diversity is supported and control of diversity is also + available, in which case the attribute + dot11DiversitySelectionRx can be dynamically modified by the + LME." + ::= { dot11PhyAntennaEntry 2 } + +dot11CurrentRxAntenna OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current antenna being used to receive, if the dot11 + DiversitySupport indicates that diversity is not supported. + The selected antenna shall be one of the antennae marked + for receive in the dot11AntennasListTable." + ::= { dot11PhyAntennaEntry 3 } + +-- ********************************************************************** +-- * End of dot11PhyAntenna TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PhyTxPower TABLE +-- ********************************************************************** + +dot11PhyTxPowerTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyTxPowerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group of attributes for dot11PhyTxPowerTable. Implemented + as a table indexed on STA ID to allow for multiple + instances on an Agent." + ::= { dot11phy 3} + +dot11PhyTxPowerEntry OBJECT-TYPE + SYNTAX Dot11PhyTxPowerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyTxPower Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyTxPowerTable 1 } + +Dot11PhyTxPowerEntry ::= + SEQUENCE { dot11NumberSupportedPowerLevels INTEGER, + dot11TxPowerLevel1 INTEGER, + dot11TxPowerLevel2 INTEGER, + dot11TxPowerLevel3 INTEGER, + dot11TxPowerLevel4 INTEGER, + dot11TxPowerLevel5 INTEGER, + dot11TxPowerLevel6 INTEGER, + dot11TxPowerLevel7 INTEGER, + dot11TxPowerLevel8 INTEGER, + dot11CurrentTxPowerLevel INTEGER } + +dot11NumberSupportedPowerLevels OBJECT-TYPE + SYNTAX INTEGER (1..8) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of power levels supported by the PMD. + This attribute can have a value of 1 to 8." + ::= { dot11PhyTxPowerEntry 1 } + +dot11TxPowerLevel1 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL1 in mW. + This is also the default power level." + ::= { dot11PhyTxPowerEntry 2 } + +dot11TxPowerLevel2 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL2 in mW." + ::= { dot11PhyTxPowerEntry 3 } + +dot11TxPowerLevel3 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL3 in mW." + ::= { dot11PhyTxPowerEntry 4 } + +dot11TxPowerLevel4 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL4 in mW." + ::= { dot11PhyTxPowerEntry 5 } + +dot11TxPowerLevel5 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL5 in mW." + ::= { dot11PhyTxPowerEntry 6 } + +dot11TxPowerLevel6 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL6 in mW." + ::= { dot11PhyTxPowerEntry 7 } + +dot11TxPowerLevel7 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL7 in mW." + ::= { dot11PhyTxPowerEntry 8 } + +dot11TxPowerLevel8 OBJECT-TYPE + SYNTAX INTEGER (0..10000) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The transmit output power for LEVEL8 in mW." + ::= { dot11PhyTxPowerEntry 9 } + +dot11CurrentTxPowerLevel OBJECT-TYPE + SYNTAX INTEGER (1..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The TxPowerLevel N currently being used to transmit data. + Some PHYs also use this value to determine the receiver + sensitivity requirements for CCA." + ::= { dot11PhyTxPowerEntry 10 } + +-- ********************************************************************** +-- * End of dot11PhyTxPower TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PhyFHSS TABLE +-- ********************************************************************** + +dot11PhyFHSSTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyFHSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group of attributes for dot11PhyFHSSTable. Implemented as a + table indexed on STA ID to allow for multiple instances on + an Agent." + ::= { dot11phy 4 } + +dot11PhyFHSSEntry OBJECT-TYPE + SYNTAX Dot11PhyFHSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyFHSS Table. + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyFHSSTable 1 } + +Dot11PhyFHSSEntry ::= + SEQUENCE { dot11HopTime INTEGER, + dot11CurrentChannelNumber INTEGER, + dot11MaxDwellTime INTEGER, + dot11CurrentDwellTime INTEGER, + dot11CurrentSet INTEGER, + dot11CurrentPattern INTEGER, + dot11CurrentIndex INTEGER, + dot11EHCCPrimeRadix Integer32, + dot11EHCCNumberofChannelsFamilyIndex Integer32, + dot11EHCCCapabilityImplemented TruthValue, + dot11EHCCCapabilityEnabled TruthValue, + dot11HopAlgorithmAdopted INTEGER, + dot11RandomTableFlag TruthValue, + dot11NumberofHoppingSets Integer32, + dot11HopModulus Integer32, + dot11HopOffset Integer32 } + +dot11HopTime OBJECT-TYPE + SYNTAX INTEGER (224) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The time in microseconds for the PMD to change from + channel 2 to channel 80." + ::= { dot11PhyFHSSEntry 1 } + +dot11CurrentChannelNumber OBJECT-TYPE + SYNTAX INTEGER (0..200) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current channel number of the frequency output by the RF + synthesizer." + ::= { dot11PhyFHSSEntry 2 } + +dot11MaxDwellTime OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum time in TU that the transmitter + is permitted to operate on a single channel." + ::= { dot11PhyFHSSEntry 3 } + +dot11CurrentDwellTime OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current time in TU that the transmitter shall operate + on a single channel, as set by the MAC. Default is 19 TU." + ::= { dot11PhyFHSSEntry 4 } + +dot11CurrentSet OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current set of patterns the PLME + is using to determine the hopping sequence. " + ::= { dot11PhyFHSSEntry 5 } + +dot11CurrentPattern OBJECT-TYPE + SYNTAX INTEGER (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current pattern the PLME is + using to determine the hop sequence." + ::= { dot11PhyFHSSEntry 6 } + +dot11CurrentIndex OBJECT-TYPE + SYNTAX INTEGER (1..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current index value the PLME is using to determine + the CurrentChannelNumber." + ::= { dot11PhyFHSSEntry 7 } + +dot11EHCCPrimeRadix OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute indicates the value to be + used as the prime radix (N) in the HCC and + EHCC algorithms." + ::= { dot11PhyFHSSEntry 8 } + +dot11EHCCNumberofChannelsFamilyIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute indicates the value to be + used as the maximum for the family index (a) + in the HCC and EHCC algorithms. The value of + this field shall not be less than the prime + radix minus 3 (N - 3). The valid range of + allowed values is (N - 1), (N - 2), and (N - 3)." + ::= { dot11PhyFHSSEntry 9 } + +dot11EHCCCapabilityImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute, when TRUE, indicates that the + station implementation is capable of generating + the HCC or EHCC algorithms for determining Hopping + patterns. The capability is disabled, otherwise. + The default value of this attribute is FALSE." + ::= { dot11PhyFHSSEntry 10 } + +dot11EHCCCapabilityEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute, when TRUE, indicates that the + capability of the station to operate using the HCC + or EHCC algorithms for determining Hopping Patterns + is enabled. The capability is disabled, otherwise. + The default value of this attribute is FALSE." + ::= { dot11PhyFHSSEntry 11 } + +dot11HopAlgorithmAdopted OBJECT-TYPE + SYNTAX INTEGER { crnt(1), hopindex(2), hcc(3) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute, indicates which of the algorithms + will be used to generate the Hopping Patterns. + Valid values are: + + 1 - hopping patterns as defined in clause 14 + 2 - hop index method (with or without table) + 3 - HCC/EHCC method" + ::= { dot11PhyFHSSEntry 12 } + +dot11RandomTableFlag OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute, indicates that a Random Table is + present when the value is True. When the value is + False it indicates that a Random Table is not + present and that the hop index method is to be + used to determine the hopping sequence. The default + value of this attribute is True." + ::= { dot11PhyFHSSEntry 13 } + +dot11NumberofHoppingSets OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Number of Sets field indicates the total + number of sets within the hopping patterns." + ::= { dot11PhyFHSSEntry 14 } + +dot11HopModulus OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of allowed channels for the hopping + set. This is defined by the governing regulatory + agency for the country code of the country + in which this device is operating." + ::= { dot11PhyFHSSEntry 15 } + +dot11HopOffset OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The next position in the hopping set." + ::= { dot11PhyFHSSEntry 16 } + +-- ********************************************************************** +-- * End of dot11PhyFHSS TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PhyDSSSEntry TABLE +-- ********************************************************************** + +dot11PhyDSSSTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyDSSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of attributes for dot11PhyDSSSEntry. Implemented as a + table indexed on ifIndex allow for multiple instances on + an Agent." + ::= { dot11phy 5 } + +dot11PhyDSSSEntry OBJECT-TYPE + SYNTAX Dot11PhyDSSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyDSSSEntry Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyDSSSTable 1 } + +Dot11PhyDSSSEntry ::= + SEQUENCE { dot11CurrentChannel INTEGER, + dot11CCAModeSupported INTEGER, + dot11CurrentCCAMode INTEGER, + dot11EDThreshold Integer32 } + +dot11CurrentChannel OBJECT-TYPE + SYNTAX INTEGER (1..14) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current operating frequency channel of the DSSS + PHY. Valid channel numbers are as defined in 15.4.6.2" + ::= { dot11PhyDSSSEntry 1 } + +dot11CCAModeSupported OBJECT-TYPE + SYNTAX INTEGER (1..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "dot11CCAModeSupported is a bit-significant value, + representing all of the CCA modes supported by the PHY. + Valid values are: + + energy detect only (ED_ONLY) = 01, + carrier sense only (CS_ONLY) = 02, + carrier sense and energy detect (ED_and_CS)= 04 + or the logical sum of any of these values. This + attribute shall not be used to indicate the CCA modes + supported by a higher rate extension PHY. Rather, the + dot11HRCCAModeSupported attribute shall be used to + indicate the CCA modes of the higher rate extension PHY." + ::= { dot11PhyDSSSEntry 2 } + +dot11CurrentCCAMode OBJECT-TYPE + SYNTAX INTEGER { edonly(1), csonly(2), edandcs(4), cswithtimer(8), + hrcsanded(16) } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current CCA method in operation. Valid values are: + energy detect only (edonly) = 01, + carrier sense only (csonly) = 02, + carrier sense and energy detect (edandcs)= 04 + carrier sense with timer (cswithtimer)= 08 + high rate carrier sense and energy detect (hrcsanded)=16." + ::= { dot11PhyDSSSEntry 3 } + +dot11EDThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The current Energy Detect Threshold being used by the DSSS PHY." + ::= { dot11PhyDSSSEntry 4 } + +-- ********************************************************************** +-- * End of dot11PhyDSSSEntry TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PhyIR TABLE +-- ********************************************************************** + +dot11PhyIRTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyIREntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group of attributes for dot11PhyIRTable. Implemented as a + table indexed on ifIndex to allow for multiple instances on + an Agent." + ::= { dot11phy 6 } + +dot11PhyIREntry OBJECT-TYPE + SYNTAX Dot11PhyIREntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyIR Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyIRTable 1 } + +Dot11PhyIREntry ::= + SEQUENCE { dot11CCAWatchdogTimerMax Integer32, + dot11CCAWatchdogCountMax Integer32, + dot11CCAWatchdogTimerMin Integer32, + dot11CCAWatchdogCountMin Integer32 } + +dot11CCAWatchdogTimerMax OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter, together with CCAWatchdogCountMax, + determines when energy detected in the channel can be + ignored." + ::= { dot11PhyIREntry 1 } + +dot11CCAWatchdogCountMax OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter, together with CCAWatchdogTimerMax, + determines when energy detected in the channel can be + ignored." + ::= { dot11PhyIREntry 2 } + +dot11CCAWatchdogTimerMin OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum value to which CCAWatchdogTimerMax can be + set." + ::= { dot11PhyIREntry 3 } + +dot11CCAWatchdogCountMin OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The minimum value to which CCAWatchdogCount can be set." + ::= { dot11PhyIREntry 4 } + +-- ********************************************************************** +-- * End of dot11PhyIR TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11RegDomainsSupported TABLE +-- ********************************************************************** + +dot11RegDomainsSupportedTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11RegDomainsSupportedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "There are different operational requirements dependent on + the regulatory domain. This attribute list describes the + regulatory domains the PLCP and PMD support in this + implementation. Currently defined values and their + corresponding Regulatory Domains are: + + FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of + Europe) = X'30', Spain = X'31', France = X'32', MKK + (Japan) = X'40', Others = X'00' " + ::= { dot11phy 7} + +dot11RegDomainsSupportedEntry OBJECT-TYPE + SYNTAX Dot11RegDomainsSupportedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11RegDomainsSupportedTable. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11RegDomainsSupportedIndex } + ::= { dot11RegDomainsSupportedTable 1 } + +Dot11RegDomainsSupportedEntry ::= + SEQUENCE { dot11RegDomainsSupportedIndex Integer32, + dot11RegDomainsSupportedValue INTEGER } + +dot11RegDomainsSupportedIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The auxiliary variable used to identify instances + of the columnar objects in the RegDomainsSupport Table." + ::= { dot11RegDomainsSupportedEntry 1 } + +dot11RegDomainsSupportedValue OBJECT-TYPE + SYNTAX INTEGER { fcc(16), doc(32), etsi(48), spain (49), france(50), + mkk (64) } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "There are different operational requirements dependent on + the regulatory domain. This attribute list describes the + regulatory domains the PLCP and PMD support in this + implementation. Currently defined values and their + corresponding Regulatory Domains are: + + FCC (USA) = X'10', DOC (Canada) = X'20', ETSI (most of + Europe) = X'30', Spain = X'31', France = X'32', MKK + (Japan) = X'40' " + ::= { dot11RegDomainsSupportedEntry 2 } + +-- ********************************************************************** +-- * End of dot11RegDomainsSupported TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11AntennasList TABLE +-- ********************************************************************** + +dot11AntennasListTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11AntennasListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table represents the list of antennae. An antenna can be + marked to be capable of transmitting, receiving, and/or for + participation in receive diversity. Each entry in this table + represents a single antenna with its properties. The maximum + number of antennae that can be contained in this table is 255." + ::= { dot11phy 8 } + +dot11AntennasListEntry OBJECT-TYPE + SYNTAX Dot11AntennasListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11AntennasListTable, representing the properties + of a single antenna. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11AntennaListIndex } + ::= { dot11AntennasListTable 1 } + +Dot11AntennasListEntry ::= + SEQUENCE { dot11AntennaListIndex Integer32, + dot11SupportedTxAntenna TruthValue, + dot11SupportedRxAntenna TruthValue, + dot11DiversitySelectionRx TruthValue } + +dot11AntennaListIndex OBJECT-TYPE + SYNTAX Integer32 (1..255) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The unique index of an antenna which is used to identify the columnar + objects in the dot11AntennasList Table." + ::= { dot11AntennasListEntry 1 } + +dot11SupportedTxAntenna OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When true, this object indicates that the antenna represented by + dot11AntennaIndex can be used as a transmit antenna." + ::= { dot11AntennasListEntry 2 } + +dot11SupportedRxAntenna OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When true, this object indicates that the antenna represented by the + dot11AntennaIndex xan be used as a receive antenna." + ::= { dot11AntennasListEntry 3 } + +dot11DiversitySelectionRx OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When true, this object indicates that the antenna represented by + dot11AntennaIndex can be used for receive diversity. This object + may only be true if the antenna can be used as a receive antenna, + as indicated by dot11SupportedRxAntenna." + ::= { dot11AntennasListEntry 4 } + +-- ********************************************************************** +-- * End of dot11AntennasList TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * SupportedDataRatesTx TABLE +-- ********************************************************************** + +dot11SupportedDataRatesTxTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11SupportedDataRatesTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Transmit bit rates supported by the PLCP and PMD, + represented by a count from X'02-X'7f, corresponding to data + rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s subject + to limitations of each individual PHY." + ::= { dot11phy 9 } + +dot11SupportedDataRatesTxEntry OBJECT-TYPE + SYNTAX Dot11SupportedDataRatesTxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An Entry (conceptual row) in the dot11SupportedDataRatesTx + Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11SupportedDataRatesTxIndex } + ::= { dot11SupportedDataRatesTxTable 1 } + +Dot11SupportedDataRatesTxEntry ::= + SEQUENCE { dot11SupportedDataRatesTxIndex Integer32, + dot11SupportedDataRatesTxValue Integer32 } + +dot11SupportedDataRatesTxIndex OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index object which identifies which data rate to access. + Range is 1..8." + ::= { dot11SupportedDataRatesTxEntry 1 } + +dot11SupportedDataRatesTxValue OBJECT-TYPE + SYNTAX Integer32 (2..127) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Transmit bit rates supported by the PLCP and PMD, + represented by a count from X'02-X'7f, corresponding to data + rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s subject + to limitations of each individual PHY." + ::= { dot11SupportedDataRatesTxEntry 2 } + +-- ********************************************************************** +-- * End of dot11SupportedDataRatesTx TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * SupportedDataRatesRx TABLE +-- ********************************************************************** + +dot11SupportedDataRatesRxTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11SupportedDataRatesRxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The receive bit rates supported by the PLCP and PMD, + represented by a count from X'002-X'7f, corresponding to data + rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s." + ::= { dot11phy 10 } + +dot11SupportedDataRatesRxEntry OBJECT-TYPE + SYNTAX Dot11SupportedDataRatesRxEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An Entry (conceptual row) in the dot11SupportedDataRatesRx Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex, + dot11SupportedDataRatesRxIndex } + ::= { dot11SupportedDataRatesRxTable 1 } + +Dot11SupportedDataRatesRxEntry ::= + SEQUENCE { dot11SupportedDataRatesRxIndex Integer32, + dot11SupportedDataRatesRxValue Integer32 } + +dot11SupportedDataRatesRxIndex OBJECT-TYPE + SYNTAX Integer32 (1..8) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index object which identifies which data rate to access. + Range is 1..8." + ::= { dot11SupportedDataRatesRxEntry 1 } + +dot11SupportedDataRatesRxValue OBJECT-TYPE + SYNTAX Integer32 (2..127) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The receive bit rates supported by the PLCP and PMD, + represented by a count from X'02-X'7f, corresponding to data + rates in increments of 500kbit/s from 1 Mbit/s to 63.5 Mbit/s." + ::= { dot11SupportedDataRatesRxEntry 2 } + +-- ********************************************************************** +-- * End of dot11SupportedDataRatesRx TABLE +-- ********************************************************************** + +--********************************************************************** +-- * dot11PhyOFDM TABLE +--********************************************************************** + +dot11PhyOFDMTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyOFDMEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Group of attributes for dot11PhyOFDMTable. Implemented as a + table indexed on ifindex to allow for multiple instances on + an Agent." + ::= { dot11phy 11 } + +dot11PhyOFDMEntry OBJECT-TYPE + SYNTAX Dot11PhyOFDMEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyOFDM Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyOFDMTable 1 } + +Dot11PhyOFDMEntry ::= + SEQUENCE { dot11CurrentFrequency INTEGER, + dot11TIThreshold Integer32, + dot11FrequencyBandsSupported INTEGER } + +dot11CurrentFrequency OBJECT-TYPE + SYNTAX INTEGER (0..99) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The number of the current operating frequency channel of the OFDM PHY." + ::= { dot11PhyOFDMEntry 1 } + +dot11TIThreshold OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Threshold being used to detect a busy medium (frequency). + CCA shall report a busy medium upon detecting the RSSI above + this threshold." + ::= { dot11PhyOFDMEntry 2 } + +dot11FrequencyBandsSupported OBJECT-TYPE + SYNTAX INTEGER (1..7) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The capability of the OFDM PHY implementation to operate in + the three U-NII bands. Coded as an integer value of a three + bit field as follows: + bit 0 .. capable of operating in the lower (5.15-5.25 GHz) + U-NII band + bit 1 .. capable of operating in the middle (5.25-5.35 GHz) + U-NII band + bit 2 .. capable of operating in the upper (5.725-5.825 GHz) + U-NII band + For example, for an implementation capable of operating in the + lower and mid bands this attribute would take the value 3." + ::= { dot11PhyOFDMEntry 3 } + +-- ********************************************************************** +-- * End of dot11PhyOFDM TABLE +-- ********************************************************************** + +-- ********************************************************************** +-- * dot11PhyHRDSSSEntry TABLE +-- ********************************************************************** + +dot11PhyHRDSSSTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11PhyHRDSSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of attributes for dot11PhyHRDSSSEntry. + Implemented as a table indexed on ifIndex to allow for + multiple instances on an Agent." + ::= { dot11phy 12 } + +dot11PhyHRDSSSEntry OBJECT-TYPE + SYNTAX Dot11PhyHRDSSSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry in the dot11PhyHRDSSSEntry Table. + + ifIndex - Each IEEE 802.11 interface is represented by an + ifEntry. Interface tables in this MIB module are indexed + by ifIndex." + INDEX { ifIndex } + ::= { dot11PhyHRDSSSTable 1 } + +Dot11PhyHRDSSSEntry ::= + SEQUENCE { dot11ShortPreambleOptionImplemented TruthValue, + dot11PBCCOptionImplemented TruthValue, + dot11ChannelAgilityPresent TruthValue, + dot11ChannelAgilityEnabled TruthValue, + dot11HRCCAModeSupported INTEGER } + +dot11ShortPreambleOptionImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute, when true, shall indicate that the + short preamble option as defined in subclause 18.2.2.2 + is implemented. The default value of this attribute + shall be false." + ::= {dot11PhyHRDSSSEntry 1 } + +dot11PBCCOptionImplemented OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute, when true, shall indicate that the PBCC + modulation option as defined in subclause 18.4.6.6 is + implemented. The default value of this attribute shall + be false." + ::= {dot11PhyHRDSSSEntry 2 } + +dot11ChannelAgilityPresent OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute indicates that the PHY is capable of + channel agility." + ::= { dot11PhyHRDSSSEntry 3 } + +dot11ChannelAgilityEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This attribute indicates that the PHY channel agility + functionality is enabled." + ::= { dot11PhyHRDSSSEntry 4 } + +dot11HRCCAModeSupported OBJECT-TYPE + SYNTAX INTEGER (1..31) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "dot11HRCCAModeSupported is a bit-significant value, + representing all of the CCA modes supported by the PHY. + Valid values are: + energy detect only (ED_ONLY) = 01, + carrier sense only (CS_ONLY) = 02, + carrier sense and energy detect (ED_and_CS)= 04, + carrier sense with timer (CS_and_Timer)= 08, + high rate carrier sense and energy detect + (HRCS_and_ED)= 16 + or the logical sum of any of these values. In + the high rate extension PHY, this attribute shall + be used in preference to the dot11CCAModeSupported + attribute." + ::= { dot11PhyHRDSSSEntry 5 } + +-- ********************************************************************** +-- * End of dot11PhyHRDSSSEntry TABLE +-- ********************************************************************** + +-- ******************************************************************** +-- * dot11 Hopping Pattern TABLE +-- ******************************************************************** + +dot11HoppingPatternTable OBJECT-TYPE + SYNTAX SEQUENCE OF Dot11HoppingPatternEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The (conceptual) table of attributes necessary for + a frequency hopping implementation to be able to + create the hopping sequences necessary to operate + in the subband for the associated domain country string." + ::= { dot11phy 13 } + +dot11HoppingPatternEntry OBJECT-TYPE + SYNTAX Dot11HoppingPatternEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry (conceptual row) in the Hopping Pattern Table + that indicates the random hopping sequence to be followed. + + IfIndex - Each IEEE 802.11 interface is represented + by an ifEntry. Interface tables in this MIB are indexed + by ifIndex." + INDEX { ifIndex, + dot11HoppingPatternIndex } + ::= { dot11HoppingPatternTable 1 } + +Dot11HoppingPatternEntry ::= + SEQUENCE { + dot11HoppingPatternIndex Integer32, + dot11RandomTableFieldNumber Integer32 } + +dot11HoppingPatternIndex OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The auxiliary variable used to identify instances of + the columnar objects in the Hopping Pattern Table." + ::= { dot11HoppingPatternEntry 1} + +dot11RandomTableFieldNumber OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This attribute shall indicate the value of the + starting channel number in the hopping sequence of + the subband for the associated domain country string. + The default value of this attribute shall be zero." + ::= { dot11HoppingPatternEntry 2} + +-- ********************************************************************** +-- * End of dot11 Hopping Pattern TABLE +--********************************************************************** + +-- ********************************************************************** +-- * Conformance Information +-- ********************************************************************** + +dot11Conformance OBJECT IDENTIFIER ::= { ieee802dot11 5 } +dot11Groups OBJECT IDENTIFIER ::= { dot11Conformance 1 } +dot11Compliances OBJECT IDENTIFIER ::= { dot11Conformance 2 } + +-- ********************************************************************** +-- * Compliance Statements +-- ********************************************************************** + +dot11Compliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMPv2 entities + that implement the IEEE 802.11 MIB." + MODULE -- this module + MANDATORY-GROUPS { + dot11SMTbase2, + dot11MACbase, dot11CountersGroup, + dot11SmtAuthenticationAlgorithms, + dot11ResourceTypeID, dot11PhyOperationComplianceGroup } + + GROUP dot11PhyDSSSComplianceGroup + DESCRIPTION + "Implementation of this group is required when object + dot11PHYType has the value of dsss. This group is + mutually exclusive with the groups dot11PhyIRComplianceGroup, + dot11PhyFHSSComplianceGroup, dot11PhyOFDMComplianceGroup + and dot11PhyHRDSSSComplianceGroup." + + GROUP dot11PhyIRComplianceGroup + DESCRIPTION + "Implementation of this group is required when object + dot11PHYType has the value of irbaseband. This group is + mutually exclusive with the groups dot11PhyDSSSComplianceGroup, + dot11PhyFHSSComplianceGroup, dot11PhyOFDMComplianceGroup + and dot11PhyHRDSSSComplianceGroup." + + GROUP dot11PhyFHSSComplianceGroup + DESCRIPTION + "Implementation of this group is required when object + dot11PHYType has the value of fhss. This group is + mutually exclusive with the groups dot11PhyDSSSComplianceGroup, + dot11PhyIRComplianceGroup, dot11PhyOFDMComplianceGroup + and dot11PhyHRDSSSComplianceGroup." + + GROUP dot11PhyOFDMComplianceGroup + DESCRIPTION + "Implementation of this group is required when object + dot11PHYType has the value of ofdm. This group is + mutually exclusive with the groups dot11PhyDSSSComplianceGroup, + dot11PhyIRComplianceGroup, dot11PhyFHSSComplianceGroup + and dot11PhyHRDSSSComplianceGroup." + + GROUP dot11PhyHRDSSSComplianceGroup + DESCRIPTION + "Implementation of this group is required when object + dot11PHYType has the value of hrdsss. This group is + mutually exclusive with the groups + dot11PhyDSSSComplianceGroup, dot11PhyIRComplianceGroup, + dot11PhyFHSSComplianceGroup and dot11PhyOFDMComplianceGroup." + + -- OPTIONAL-GROUPS { dot11SMTprivacy, dot11MACStatistics, + -- dot11PhyAntennaComplianceGroup, dot11PhyTxPowerComplianceGroup, + -- dot11PhyRegDomainsSupportGroup, + -- dot11PhyAntennasListGroup, dot11PhyRateGroup } + + ::= { dot11Compliances 1 } + +-- ********************************************************************** +-- * Groups - units of conformance +-- ********************************************************************** + +dot11SMTbase OBJECT-GROUP + OBJECTS { dot11StationID, dot11MediumOccupancyLimit, + dot11CFPollable, + dot11CFPPeriod, + dot11CFPMaxDuration, + dot11AuthenticationResponseTimeOut, + dot11PrivacyOptionImplemented, + dot11PowerManagementMode, + dot11DesiredSSID, dot11DesiredBSSType, + dot11OperationalRateSet, + dot11BeaconPeriod, dot11DTIMPeriod, + dot11AssociationResponseTimeOut } + STATUS deprecated + DESCRIPTION + "The SMT object class provides the necessary support at the + STA to manage the processes in the STA such that the STA may + work cooperatively as a part of an IEEE 802.11 network." + ::= { dot11Groups 1 } + +dot11SMTprivacy OBJECT-GROUP + OBJECTS { dot11PrivacyInvoked, + dot11WEPKeyMappingLength, dot11ExcludeUnencrypted, + dot11WEPICVErrorCount , dot11WEPExcludedCount , + dot11WEPDefaultKeyID, + dot11WEPDefaultKeyValue, + dot11WEPKeyMappingWEPOn, + dot11WEPKeyMappingValue , dot11WEPKeyMappingAddress, + dot11WEPKeyMappingStatus } + STATUS current + DESCRIPTION + "The SMTPrivacy package is a set of attributes that shall be + present if WEP is implemented in the STA." + ::= { dot11Groups 2 } + +dot11MACbase OBJECT-GROUP + OBJECTS { dot11MACAddress, dot11Address, + dot11GroupAddressesStatus, + dot11RTSThreshold, dot11ShortRetryLimit, + dot11LongRetryLimit, dot11FragmentationThreshold, + dot11MaxTransmitMSDULifetime, + dot11MaxReceiveLifetime, dot11ManufacturerID, + dot11ProductID } + STATUS current + DESCRIPTION + "The MAC object class provides the necessary support for the + access control, generation, and verification of frame check + sequences (FCSs), and proper delivery of valid data to upper + layers." + ::= { dot11Groups 3 } + +dot11MACStatistics OBJECT-GROUP + OBJECTS { dot11RetryCount, dot11MultipleRetryCount, + dot11RTSSuccessCount, dot11RTSFailureCount, + dot11ACKFailureCount, dot11FrameDuplicateCount } + STATUS current + DESCRIPTION + "The MACStatistics package provides extended statistical + information on the operation of the MAC. This + package is completely optional." + ::= { dot11Groups 4 } + +dot11ResourceTypeID OBJECT-GROUP + OBJECTS { dot11ResourceTypeIDName, dot11manufacturerOUI, + dot11manufacturerName, dot11manufacturerProductName, + dot11manufacturerProductVersion } + STATUS current + DESCRIPTION + "Attributes used to identify a STA, its manufacturer, + and various product names and versions." + ::= { dot11Groups 5 } + +dot11SmtAuthenticationAlgorithms OBJECT-GROUP + OBJECTS { dot11AuthenticationAlgorithm, + dot11AuthenticationAlgorithmsEnable } + STATUS current + DESCRIPTION + "Authentication Algorithm Table." + ::= { dot11Groups 6 } + +dot11PhyOperationComplianceGroup OBJECT-GROUP + OBJECTS { dot11PHYType, dot11CurrentRegDomain, dot11TempType } + STATUS current + DESCRIPTION + "PHY layer operations attributes." + ::= { dot11Groups 7 } + +dot11PhyAntennaComplianceGroup OBJECT-GROUP + OBJECTS { dot11CurrentTxAntenna, dot11DiversitySupport, + dot11CurrentRxAntenna } + STATUS current + DESCRIPTION + "Attributes for Data Rates for IEEE 802.11." + ::= { dot11Groups 8 } + +dot11PhyTxPowerComplianceGroup OBJECT-GROUP + OBJECTS { dot11NumberSupportedPowerLevels, dot11TxPowerLevel1, + dot11TxPowerLevel2, dot11TxPowerLevel3, dot11TxPowerLevel4, + dot11TxPowerLevel5, dot11TxPowerLevel6, dot11TxPowerLevel7, + dot11TxPowerLevel8, dot11CurrentTxPowerLevel } + STATUS current + DESCRIPTION + "Attributes for Control and Management of transmit power." + ::= { dot11Groups 9 } + +dot11PhyFHSSComplianceGroup OBJECT-GROUP + OBJECTS { dot11HopTime, dot11CurrentChannelNumber, dot11MaxDwellTime, + dot11CurrentDwellTime, dot11CurrentSet, dot11CurrentPattern, + dot11CurrentIndex} + STATUS current + DESCRIPTION + "Attributes that configure the Frequency Hopping for IEEE + 802.11." + ::= { dot11Groups 10 } + +dot11PhyDSSSComplianceGroup OBJECT-GROUP + OBJECTS { dot11CurrentChannel, dot11CCAModeSupported, + dot11CurrentCCAMode, dot11EDThreshold} + STATUS current + DESCRIPTION + "Attributes that configure the DSSS for IEEE 802.11." + ::= { dot11Groups 11 } + +dot11PhyIRComplianceGroup OBJECT-GROUP + OBJECTS { dot11CCAWatchdogTimerMax, dot11CCAWatchdogCountMax, + dot11CCAWatchdogTimerMin, dot11CCAWatchdogCountMin} + STATUS current + DESCRIPTION + "Attributes that configure the baseband IR for IEEE 802.11." + ::= { dot11Groups 12 } + +dot11PhyRegDomainsSupportGroup OBJECT-GROUP + OBJECTS { dot11RegDomainsSupportedValue} + STATUS current + DESCRIPTION + "Attributes that specify the supported Regulation Domains." + ::= { dot11Groups 13} + +dot11PhyAntennasListGroup OBJECT-GROUP + OBJECTS { dot11SupportedTxAntenna, + dot11SupportedRxAntenna, dot11DiversitySelectionRx } + STATUS current + DESCRIPTION + "Attributes that specify the supported Regulation Domains." + ::= { dot11Groups 14 } + +dot11PhyRateGroup OBJECT-GROUP + OBJECTS { dot11SupportedDataRatesTxValue, + dot11SupportedDataRatesRxValue } + STATUS current + DESCRIPTION + "Attributes for Data Rates for IEEE 802.11." + ::= { dot11Groups 15 } + +dot11CountersGroup OBJECT-GROUP + OBJECTS { dot11TransmittedFragmentCount, + dot11MulticastTransmittedFrameCount, + dot11FailedCount, dot11ReceivedFragmentCount, + dot11MulticastReceivedFrameCount, + dot11FCSErrorCount, + dot11WEPUndecryptableCount, + dot11TransmittedFrameCount } + STATUS current + DESCRIPTION + "Attributes from the dot11CountersGroup that are not described + in the dot11MACStatistics group. These objects are + mandatory." + ::= { dot11Groups 16 } + +dot11NotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { dot11Disassociate, + dot11Deauthenticate, + dot11AuthenticateFail } + STATUS current + DESCRIPTION + "IEEE 802.11 notifications" + ::= { dot11Groups 17 } + +dot11SMTbase2 OBJECT-GROUP + OBJECTS { dot11MediumOccupancyLimit, + dot11CFPollable, + dot11CFPPeriod, + dot11CFPMaxDuration, + dot11AuthenticationResponseTimeOut, + dot11PrivacyOptionImplemented, + dot11PowerManagementMode, + dot11DesiredSSID, dot11DesiredBSSType, + dot11OperationalRateSet, + dot11BeaconPeriod, dot11DTIMPeriod, + dot11AssociationResponseTimeOut, + dot11DisassociateReason, + dot11DisassociateStation, + dot11DeauthenticateReason, + dot11DeauthenticateStation, + dot11AuthenticateFailStatus, + dot11AuthenticateFailStation } + STATUS current + DESCRIPTION + "The SMTbase2 object class provides the necessary support at the + STA to manage the processes in the STA such that the STA may + work cooperatively as a part of an IEEE 802.11 network." + ::= { dot11Groups 18 } + +dot11PhyOFDMComplianceGroup OBJECT-GROUP + OBJECTS { dot11CurrentFrequency, + dot11TIThreshold, + dot11FrequencyBandsSupported } + STATUS current + DESCRIPTION + "Attributes that configure the OFDM for IEEE 802.11." + ::= { dot11Groups 19 } + +dot11SMTbase3 OBJECT-GROUP + OBJECTS { dot11MediumOccupancyLimit, + dot11CFPollable, + dot11CFPPeriod, + dot11CFPMaxDuration, + dot11AuthenticationResponseTimeOut, + dot11PrivacyOptionImplemented, + dot11PowerManagementMode, + dot11DesiredSSID, dot11DesiredBSSType, + dot11OperationalRateSet, + dot11BeaconPeriod, dot11DTIMPeriod, + dot11AssociationResponseTimeOut, + dot11DisassociateReason, + dot11DisassociateStation, + dot11DeauthenticateReason, + dot11DeauthenticateStation, + dot11AuthenticateFailStatus, + dot11AuthenticateFailStation, + dot11MultiDomainCapabilityImplemented, + dot11MultiDomainCapabilityEnabled, + dot11CountryString } + STATUS current + DESCRIPTION + "The SMTbase3 object class provides the necessary support at the + STA to manage the processes in the STA such that the STA may + work cooperatively as a part of an IEEE 802.11 network, when the STA + is capable of multi-domain operation. This object group should be + implemented when the multi-domain capability option is implemented." + ::= { dot11Groups 20 } + +dot11MultiDomainCapabilityGroup OBJECT-GROUP + OBJECTS { dot11FirstChannelNumber, + dot11NumberofChannels, + dot11MaximumTransmitPowerLevel } + STATUS current + DESCRIPTION + "The dot11MultiDomainCapabilityGroup object class provides + the objects necessary to manage the channels usable by a STA, + when the multi-domain capability option is implemented." + ::= { dot11Groups 21 } + +dot11PhyFHSSComplianceGroup2 OBJECT-GROUP + OBJECTS { dot11HopTime, dot11CurrentChannelNumber, dot11MaxDwellTime, + dot11CurrentDwellTime, dot11CurrentSet, dot11CurrentPattern, + dot11CurrentIndex, dot11EHCCPrimeRadix, + dot11EHCCNumberofChannelsFamilyIndex, + dot11EHCCCapabilityImplemented, dot11EHCCCapabilityEnabled, + dot11HopAlgorithmAdopted, dot11RandomTableFlag, + dot11NumberofHoppingSets, dot11HopModulus, + dot11HopOffset, dot11RandomTableFieldNumber } + STATUS current + DESCRIPTION + "Attributes that configure the Frequency Hopping for IEEE + 802.11 when multi-domain capability option is implemented." + ::= { dot11Groups 22 } + +dot11PhyHRDSSSComplianceGroup OBJECT-GROUP + OBJECTS { dot11CurrentChannel, dot11CCAModeSupported, + dot11CurrentCCAMode, dot11EDThreshold, + dot11ShortPreambleOptionImplemented, + dot11PBCCOptionImplemented, dot11ChannelAgilityPresent, + dot11ChannelAgilityEnabled, dot11HRCCAModeSupported } + STATUS current + DESCRIPTION + "Attributes that configure the HRDSSS for IEEE 802.11." + ::= { dot11Groups 23 } + +-- ********************************************************************** +-- * End of 802.11 MIB +-- ********************************************************************** + +END + Index: /branches/releng-9.0/nanobsd/files/usr/local/etc/snmp/snmpd.conf =================================================================== --- /branches/releng-9.0/nanobsd/files/usr/local/etc/snmp/snmpd.conf (revision 10417) +++ /branches/releng-9.0/nanobsd/files/usr/local/etc/snmp/snmpd.conf (revision 10417) @@ -0,0 +1,90 @@ +# snmpd.conf + +# First, map the community name (COMMUNITY) into a security name +# (local and mynetwork, depending on where the request is coming +# from): + +# sec.name source community +com2sec local localhost public +com2sec mynetwork 172.16.0.0/12 public +com2sec mynetwork 10.0.0.0/8 public +com2sec mynetwork 192.168.0.0/16 public + + + +# Second, map the security names into group names: + +# sec.model sec.name +group MyRWGroup v1 local +group MyRWGroup v2c local +group MyRWGroup usm local +group MyROGroup v1 mynetwork +group MyROGroup v2c mynetwork +group MyROGroup usm mynetwork + + +# Third, create a view for us to let the groups have rights to: + +# incl/excl subtree mask +view all included .1 80 + + +# Finally, grant the 2 groups access to the 1 view with different +# write permissions: + +# context sec.model sec.level match read write notif +access MyROGroup "" any noauth exact all none none +access MyRWGroup "" any noauth exact all all none + + +# System contact information + +sysLocation "Somewhere in or near Leiden" +sysContact "Stichting Wireless Leiden / +31 71 5139817" + + +# Process checks. + +# name max min +proc lvrouted.opt 1 1 +proc sshd 8 1 +proc syslogd 1 1 +proc ntpd 1 1 +proc snmpd 1 1 +proc dhcpd 1 1 +proc pen 1 1 +proc cron 2 1 +proc named 1 1 + + +# disk checks + +# path min +#disk / 90% +#disk /var 80% +#disk /usr 80% +#disk /tmp 60% +includeAllDisks 85% + + +# load average checks + +# 1max 5max 15max +load 12 14 14 + + +# Pass through control + +# miboid exec-command +extend .1.3.6.1.4.1.2021.70 dhcp-users /bin/sh -c "cat /var/db/dnsmasq.leases \| awk '{ print $1,$2,$3 }'" +extend .1.3.6.1.4.1.2021.71 portal-users /bin/sh -c "cat /var/db/clients \| awk '{ print $1,$2,$3 }'" +extend .1.3.6.1.4.1.2021.72 arp-users /bin/sh -c "cat /var/db/connect.gone \| awk '{ print $1,$2,$3,$4,$5 }'" +extend .1.3.6.1.4.1.2012.73 proxy-users bin/sh -c "cat /var/log/tinyproxy.log \| grep -v 2cnode \| awk '/.wleiden.net/ { print $2,$3,$11 }' \| tr -d '[]' \| sort \| uniq " + +extend .1.3.6.1.4.1.2021.80 etc-checksum /bin/sh -c "cat `find /etc` \| md5" +extend .1.3.6.1.4.1.2021.81 local-list /bin/sh -c "find /usr/local/ \| wc -l" +extend .1.3.6.1.4.1.2021.82 build-box /bin/sh -c "uname -v \| awk '{ print $10 }' \| cut -d \\: -f 1" +extend .1.3.6.1.4.1.2021.83 freebsd-ver /bin/sh -c "uname -r" +extend .1.3.6.1.4.1.2021.84 wl-ver /bin/sh -c "cat /tools/wl-release.txt \| awk '/Revision/ {print $2 }' " +extend .1.3.6.1.4.1.2021.85 wl-date /bin/sh -c "cat /tools/wl-release.txt | awk '/Changed\ Date/ {print $4,$5 }'" + Index: /branches/releng-9.0/nanobsd/files/usr/local/etc/thttpd.conf =================================================================== --- /branches/releng-9.0/nanobsd/files/usr/local/etc/thttpd.conf (revision 10409) +++ /branches/releng-9.0/nanobsd/files/usr/local/etc/thttpd.conf (revision 10417) @@ -3,4 +3,3 @@ cgipat=** nochroot -logfile=/var/log/thttpd.log pidfile=/var/run/thttpd.pid Index: /branches/releng-9.0/nanobsd/files/usr/local/sbin/find-nanostation =================================================================== --- /branches/releng-9.0/nanobsd/files/usr/local/sbin/find-nanostation (revision 10417) +++ /branches/releng-9.0/nanobsd/files/usr/local/sbin/find-nanostation (revision 10417) @@ -0,0 +1,17 @@ +#!/bin/sh +# Discover nanostation using CDPv1 packets +# Credits: http://sidewynder.blogspot.com/2005/07/tcpdump-filter-for-capturing-only.html + +if [ "x$1" = "x" ]; then + echo "Usage: $0 [count]" 1>&2 + echo "Find (lost) Nanostation IP using 'count' CDPv1 packet(s)" + echo "Normally CDPv1 packets get send every minute" 1>&2 + echo "Interface hints: `ifconfig -l`" 1>&2 + exit 1 +fi +IFACE=$1 +# By default the local and remote will announce a broadcast. +COUNT=${2-2} + + +tcpdump -nn -v -i $IFACE -s 1500 -c $COUNT 'ether[18:4] == 0x000c2000' Index: /branches/releng-9.0/nanobsd/files/usr/local/sbin/store-ntpdrift =================================================================== --- /branches/releng-9.0/nanobsd/files/usr/local/sbin/store-ntpdrift (revision 10417) +++ /branches/releng-9.0/nanobsd/files/usr/local/sbin/store-ntpdrift (revision 10417) @@ -0,0 +1,30 @@ +#!/bin/sh +# Back-up ntp.drift file changes to flash. + +SRC="/var/db/ntp.drift" +DST="/cfg/local/ntp.drift" + +trap "umount /cfg" 1 2 15 EXIT + +EX_OK=0 +EX_NOINPUT=66 +EX_CANTCREAT=73 + +mount -ro noatime /cfg + +# Check whether source exists +if [ ! -r $SRC ]; then + echo "ERROR: '$SRC' not readable!" 1>&2 + exit $EX_NOINPUT +fi + +# Compare files, ignore white spaces, modification, etc +diff -b -B -q ${SRC} ${DST}; RETVAL=$? +if [ $RETVAL -ne 0 ]; then + # 2: DST does not yet, exists, 1: file differs + mount -uwo noatime /cfg + mkdir -p /cfg/local + cp ${SRC} ${DST} +fi + +exit $EX_OK Index: anches/releng-9.0/nanobsd/files/usr/local/share/snmp/snmpd.conf =================================================================== --- /branches/releng-9.0/nanobsd/files/usr/local/share/snmp/snmpd.conf (revision 10409) +++ (revision ) @@ -1,97 +1,0 @@ -# snmpd.conf - -# First, map the community name (COMMUNITY) into a security name -# (local and mynetwork, depending on where the request is coming -# from): - -# sec.name source community -com2sec local localhost public -com2sec mynetwork 172.16.0.0/12 public -com2sec mynetwork 10.0.0.0/8 public -com2sec mynetwork 192.168.0.0/16 public - - - -# Second, map the security names into group names: - -# sec.model sec.name -group MyRWGroup v1 local -group MyRWGroup v2c local -group MyRWGroup usm local -group MyROGroup v1 mynetwork -group MyROGroup v2c mynetwork -group MyROGroup usm mynetwork - - -# Third, create a view for us to let the groups have rights to: - -# incl/excl subtree mask -view all included .1 80 - - -# Finally, grant the 2 groups access to the 1 view with different -# write permissions: - -# context sec.model sec.level match read write notif -access MyROGroup "" any noauth exact all none none -access MyRWGroup "" any noauth exact all all none - - -# System contact information - -sysLocation Somewhere in or near Leiden -sysContact Stichting Wireless Leiden / +31 71 5139817 - - -# Process checks. - -# name max min -proc lvrouted.opt 1 1 -proc sshd 8 1 -proc syslogd 1 1 -proc ntpd 1 1 -proc snmpd 1 1 -proc dhcpd 1 1 -proc pen 1 1 -proc cron 2 1 -proc named 1 1 - - -# disk checks - -# path min -#disk / 90% -#disk /var 80% -#disk /usr 80% -#disk /tmp 60% -includeAllDisks 85% - - -# load average checks - -# 1max 5max 15max -load 12 14 14 - - -# Pass through control - -# miboid exec-command -pass .1.3.6.1.4.1.2021.50 /usr/local/nagios/bin/processor - -pass_persist .1.3.6.1.4.1.21695.1.2 /usr/local/sbin/dhcpd-snmp /usr/local/etc/dhcpd-snmp.conf - -extend .1.3.6.1.4.1.2021.61 nagios-www /usr/local/sbin/proxy-test.sh -extend .1.3.6.1.4.1.2021.62 nagios-routing /usr/local/sbin/lvrouted-test.sh - -extend .1.3.6.1.4.1.2021.70 dhcp-users /bin/sh -c "cat /var/db/dnsmasq.leases \| awk '{ print $1,$2,$3 }'" -extend .1.3.6.1.4.1.2021.71 portal-users /bin/sh -c "cat /var/db/clients \| awk '{ print $1,$2,$3 }'" -extend .1.3.6.1.4.1.2021.72 arp-users /bin/sh -c "cat /var/db/connect.gone \| awk '{ print $1,$2,$3,$4,$5 }'" -extend .1.3.6.1.4.1.2012.73 proxy-users bin/sh -c "cat /var/log/tinyproxy.log \| grep -v 2cnode \| awk '/.wleiden.net/ { print $2,$3,$11 }' \| tr -d '[]' \| sort \| uniq " - -extend .1.3.6.1.4.1.2021.80 etc-checksum /bin/sh -c "cat `find /etc` \| md5" -extend .1.3.6.1.4.1.2021.81 local-list /bin/sh -c "find /usr/local/ \| wc -l" -extend .1.3.6.1.4.1.2021.82 build-box /bin/sh -c "uname -v \| awk '{ print $10 }' \| cut -d \\: -f 1" -extend .1.3.6.1.4.1.2021.83 freebsd-ver /bin/sh -c "uname -r" -extend .1.3.6.1.4.1.2021.84 wl-ver /bin/sh -c "cat /tools/wl-release.txt \| awk '/Revision/ {print $2 }' " -extend .1.3.6.1.4.1.2021.85 wl-date /bin/sh -c "cat /tools/wl-release.txt | awk '/Changed\ Date/ {print $4,$5 }'" -