source:
genesis/nodes/CNodeRund/wleiden.conf@
1530
| Last change on this file since 1530 was 1530, checked in by , 21 years ago | |
|---|---|
| File size: 1.7 KB | |
| Rev | Line | |
|---|---|---|
| [813] | 1 | # |
| 2 | # | |
| 3 | # Read by /usr/local/sbin/wireless-up.pl | |
| 4 | # | |
| 5 | # config CNodeRund | |
| 6 | ||
| [1206] | 7 | $location='Janvossensteeg'; |
| [813] | 8 | $master_ip='172.17.160.1'; |
| 9 | $gw_open='closed'; | |
| 10 | $nodetype='cnode'; | |
| 11 | $nodename='Rund'; | |
| 12 | ||
| 13 | $OS='FreeBSD'; | |
| 14 | $labelpos='right'; | |
| 15 | ||
| 16 | ||
| 17 | ||
| [830] | 18 | |
| 19 | ||
| [813] | 20 | $X='93745'; |
| 21 | $Y='464000'; | |
| 22 | ||
| 23 | #$Y='463931'; | |
| 24 | ||
| 25 | #$X='93658'; | |
| 26 | #$Y='464131'; | |
| 27 | ||
| 28 | $LOKATIE='n.v.t.'; | |
| 29 | ||
| 30 | $N=''; | |
| 31 | $E=''; | |
| 32 | ||
| 33 | ||
| [1285] | 34 | $config{'sis0'}=sprintf <<ED0; # Ethernet |
| [813] | 35 | TYPE=ethernet |
| 36 | IP=172.17.160.65/28 | |
| [1391] | 37 | # Link to the cisco downstairs does not reliably |
| 38 | # auto negotiate at 100Mbit/full duplex; so force | |
| 39 | # the speed down a wee bit. | |
| 40 | MEDIA=10baseT/UTP | |
| [813] | 41 | |
| 42 | DESC=Ethernet naar Dirkx | |
| 43 | SDESC=2dirkx | |
| 44 | SPEED=10240000000 | |
| 45 | ||
| 46 | DHCP=no | |
| 47 | ||
| 48 | OSPF_BROADCAST=no | |
| 49 | OSPF_NEIGHBORS=no | |
| 50 | ||
| 51 | ED0 | |
| 52 | ||
| 53 | $config{'wi0'}=sprintf <<EW0; # AP NW | |
| 54 | TYPE=wireless | |
| 55 | IP=$master_ip/26 | |
| 56 | DESC=Omni voor de buurt | |
| 57 | SDESC=omni | |
| 58 | SPEED=11534336 | |
| 59 | ||
| 60 | #OSPF_BROADCAST=no | |
| 61 | OSPF_NEIGHBORS=no | |
| 62 | ||
| 63 | #DHCP=no | |
| 64 | DHCP=10-60 | |
| 65 | ||
| 66 | MODE=master | |
| 67 | ESSID=ap-omni.rund.wleiden.net | |
| [1530] | 68 | CHANNEL=11 |
| [813] | 69 | |
| 70 | ||
| [830] | 71 | |
| [813] | 72 | POLAR=Vert |
| 73 | ANTENNA=Omni | |
| 74 | GAIN=3dBi | |
| 75 | DIRECTION=0 | |
| 76 | BEAMWIDTH=360 | |
| 77 | CABLE=1 | |
| 78 | HEIGTH=12 | |
| 79 | ||
| 80 | EW0 | |
| 81 | ||
| 82 | $config{'wi1'}=sprintf <<EW1; # link naar CeTIM | |
| 83 | TYPE=wireless | |
| 84 | IP=172.16.0.178/30 | |
| 85 | DESC=Link naar CeTIM | |
| 86 | SDESC=2cetim | |
| 87 | SPEED=11534336 | |
| 88 | POINT_TO_POINT=172.16.0.177 | |
| 89 | ||
| 90 | ||
| [830] | 91 | |
| 92 | ||
| [813] | 93 | OSPF_BROADCAST=no |
| 94 | OSPF_NEIGHBORS=172.16.0.177 | |
| 95 | ||
| 96 | MODE=managed | |
| 97 | ESSID=il-nw.cetim3.wleiden.net | |
| 98 | ||
| 99 | CHANNEL=9 | |
| 100 | ||
| [830] | 101 | |
| 102 | ||
| [813] | 103 | POLAR=Hor |
| 104 | ANTENNA=Yagi | |
| 105 | GAIN=16dBi | |
| 106 | DIRECTION=150 | |
| 107 | BEAMWIDTH=20 | |
| 108 | CABLE=2 | |
| 109 | HEIGTH=22 | |
| 110 | ||
| 111 | DHCP=no | |
| 112 | ||
| 113 | EW1 | |
| 114 | ||
| 115 | ||
| 116 | $config{'wi2'}=sprintf <<EW2; # link naar LvLn | |
| 117 | TYPE=wireless | |
| 118 | IP=172.16.0.182/30 | |
| 119 | DESC=Link naar LvLn | |
| 120 | SDESC=2lvln | |
| 121 | SPEED=11534336 | |
| 122 | POINT_TO_POINT=172.16.0.181 | |
| 123 | ||
| 124 | ||
| [830] | 125 | |
| 126 | ||
| [813] | 127 | OSPF_BROADCAST=no |
| 128 | OSPF_NEIGHBORS=172.16.0.181 | |
| 129 | ||
| 130 | MODE=managed | |
| 131 | ESSID=omni.lvln0.wleiden.net | |
| 132 | ||
| 133 | CHANNEL=9 | |
| 134 | ||
| [830] | 135 | |
| 136 | ||
| [813] | 137 | POLAR=Hor |
| 138 | ANTENNA=SD15 | |
| 139 | GAIN=15dBi | |
| 140 | DIRECTION=250 | |
| 141 | BEAMWIDTH=40 | |
| 142 | CABLE=1 | |
| 143 | HEIGTH=22 | |
| 144 | ||
| 145 | DHCP=no | |
| 146 | ||
| 147 | EW2 | |
| 148 | ||
| 149 |
Note:
See TracBrowser
for help on using the repository browser.
